1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG630
    5. /
  5. 6
Page 26 / 31 Scroll up to view Page 21 - 25
21
Indicator
Status
Description
Internet
On
The HG630 is working in routing mode.
No data is being transmitted.
Blinking
The HG630 is working in routing mode.
Data is being transmitted.
Off
The HG630 is working in bridge mode.
The HG630 is powered off.
WLAN
On
The WLAN connection is set up, but no data is
being transmitted.
Blinking
The WLAN connection is set up, and data is being
transmitted.
Off
The WLAN function is disabled.
WPS
Blinking
A wireless client, such as a computer
installed with a wireless network adapter, is
connecting to the HG630 using the WPS
function.
This process lasts for no longer than 120
seconds.
Off
The WPS function is disabled or faulty.
LAN1 ~
LAN4
On
The HG630 is connected to a device properly.
Blinking
Data is being transmitted between the HG630 and
the device connected.
Off
No connection is set up on the port.
Page 27 / 31
22
Indicator
Status
Description
USB
Blinking
The HG630 is being activated through USB
modem.
Data is being transmitted on the USB port.
Steady on
The HG630 is activated through USB modem.
A portable storage device is connected to the
USB port.
Off
The USB port is not connected.
The HG630 is powered off.
7.2 Ports and Buttons
DSL
1
2
3
4
5
6
7
8
9
10
11
Page 28 / 31
23
Number
Port or
Button
Description
1
WPS
Used to enable the WPS function.
2
WLAN
Used to enable or disable wireless network function
quickly.
3
On/Off
Used to power on or off the HG630.
4
DSL
Used to connect to the MODEM port on the splitter or
connect to the telephone wall jack.
5 ~ 8
LAN4~
LAN1
Used to connect Ethernet devices, such as
computers and switches, to the HG630.
9
USB
USB port used to connect to a USB device, such as a
USB storage device or printer.
NOTE
The maximum voltage/current output from the USB
port is 5 V/1 A. That is, the input voltage/current of
the USB device connected to the USB port cannot
exceed 5 V/1 A. Otherwise, the HG630 may
not work correctly.
10
Power
Used to connect to the power adapter.
11
Reset
To restore the HG630 to its factory settings, power it
on, press and hold the
Reset
button for at least 6
seconds, and then release it.
NOTE
After you restore the HG630 to its factory settings,
your user settings will be lost. Therefore, use this
function with caution.
Page 29 / 31
24
7.3 Default Settings
Parameter
Setting
IP address of the LAN port
192.168.1.1
Subnet mask of the LAN port
255.255.255.0
User name used to log in to
the web-based configuration utility
user
Password used to log in to
the web-based configuration utility
HuaweiUser
SSID used to access wireless network
Check the label on the HG630's rear
panel
WLAN key used to access wireless
network
Check the label on the HG630's rear
panel
DHCP server function
Enable
WLAN function
Enable
7.4 Technical Specifications
Item
Specification
Ambient temperature for
operation
0°C to 40°C (32°F to 104°F)
Dimensions (H × W × L)
About 137 mm × 60 mm × 162 mm
(include the base)
Weight
< 300 g
(Not including the power adapter)
Page 30 / 31
25
Item
Specification
Relative humidity for operation
5% to 95%, non-condensing
WLAN standards
802.11b, 802.11g and 802.11n (2.4 GHz)
Wireless transmission rates
802.11b
Up to 11 Mbit/s
802.11g
Up to 54 Mbit/s
802.11n (with 2T2R
external antenna used)
Up to 300 Mbit/s

Rate

4.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top