Huawei HG532s Router Manual PDF (Setup & Configuration Guide)

Page 26 / 40 Scroll up to view Page 21 - 25

21

Step 3

Click the

WLAN

tab.

Step 4

Select

Enable WLAN

.

Step 5

In

SSID

, enter a wireless network name.

Step 6

For

Security, select WPA-PSK/WPA2-PSK

. In

WPA

pre-shared

key

, enter a password. Use the default settings for other parameters.

Step 7

Click

Submit

.

You must remember the password you set. You will be prompted to enter this

password when connecting wireless devices, such as a computer, to the

HG532s's wireless network. Connection to the HG532s's wireless network fails

if you enter an incorrect password.

6.4 Changing the PIN code for your SIM card

If you want to change the PIN code of your SIM card, do as follows:

Step 1

Log in to the HG532s's web-based configuration utility.

Step 2

Click

Advanced

>

in the navigation tree on the left.

Step 3

Choose the

page.

Step 4

Select

Verify

from the

PIN operation

drop-down combo box, and

Click

Submit

.

Step 5

After the PIN code is verified, select

Change

from the

PIN operation

drop-down combo box.

Step 6

Enter the original PIN number in the

text box.

Step 7

Enter the Current

code and the

New PIN

code. Then enter the

new PIN again in the

Confirm

text box for confirmation.

Step 8

Click

Submit

to finish the settings.

Use the default values for the other parameters. In general, they do

not need to be configured.

If you forget the wireless network name and its password, log in to

the web-based configuration utility, and set a new name and

password. Alternatively, you can restore the HG532s to its default

settings. The name and password are then restored to the values

printed on the label on the HG532s's rear panel.

Page 27 / 40

22

6.5

Restoring Default Settings

If you restore the HG532s to its default settings, all customized

user data will be lost. Use this function only when necessary.

To restore the HG532s to its default settings, power on the HG532s, press and

hold the

Reset

button on the rear panel for over 6 seconds, and then release

the button.

You can also do the following to restore the HG532s to its default settings from

the web-based configuration utility:

Step 1

Log in to the HG532s's web-based configuration utility.

Step 2

Choose

Maintenance

>

Device

.

Step 3

Click the

Reset

tab.

Step 4

Click

Restore Default Settings

.

Step 5

In the displayed dialog box, click

OK

.

After the preceding steps, the login page is displayed. You can enter the default

user name (

user

) and password (

user

) to log in.

Page 28 / 40

23

7

FAQs

How can I quickly enable or disable the wireless network function?

Press and hold the

WLAN

button for over 1 second, and then release the

button. The

WLAN

indicator indicates the status of the wireless network

function.

How can I quickly restore the HG532s to its default settings?

To restore the HG532s to its default settings, press and hold the

Reset

button

on the HG532s's rear panel for over 6 seconds when the HG532s is powered

on, and then release the button.

What can I do if I cannot access the Internet?

Step 1

Check that the

Power

indicator on the HG532s is steady on.

If the

Power

indicator is off, perform further checks as follows:

1. Check that the HG532s is turned on.

2. Check that electricity comes from the socket and that the power

input from the socket meets the requirements described on the

label of the HG532s's power adapter. If the voltage is unstable, for

example, if the voltage is too high or too low, do not use the

HG532s. Wait until the voltage recovers, and then use the HG532s.

3. Check that the HG532s is securely connected to the socket using

its power adapter.

If the

Power

indicator is still off, contact an authorized maintenance

center.

Step 2

After powering on the HG532s, wait for about 3 minutes. Then

check whether the

ADSL

indicator turns steady on.

If the

ADSL

indicator is off, perform further checks as follows:

1. Check that the telephone line is correctly and securely connected,

especially the connection between the telephone line and the

splitter.

2.

Check that the HG532s and telephone line are located far from any

electric appliances that generate strong magnetic or electric fields.

Replace the telephone line when necessary.

Page 29 / 40

24

If the

ADSL

indicator is still off, contact your network service

provider.

Step 3

Check whether the

LAN

indicator is on.

If the

LAN

indicator is off, perform further checks as follows:

1.

Check that the network adapter on your computer is enabled.

2. Check that the network cable between the HG532s and the

computer is securely connected. Remove and then insert the

network cable or replace the network cable when necessary.

If the

LAN

indicator is still off, contact an authorized maintenance

center.

Step 4

Check that the driver for the network adapter is correctly installed.

The following example uses a computer running the Windows XP

operating system to check whether the driver for the network

adapter is installed:

1. Right-click

My Computer

, and choose

Manage

from the displayed

shortcut menu.

2. In the

Computer Management

window, click

Device Manager

.

3. In the right pane of the

Computer Management

window, click

Network adapters

.

If no network adapter is found or if a question mark (?) or an

exclamation mark (!) is displayed next to the network adapter icon,

the driver for the network adapter is not correctly installed.

Re-install the driver.

Step 5

Check that PPP dial-up software is installed and parameters are set

correctly.

For details about parameter settings, see the user guide for the

PPP dial-up software.

Step 6

Check that you have entered the correct user name and password

required by the PPP dial-up software.

The user name and password are provided by your network service

provider.

Step 7

Check that you can use the PPP dial-up software to set up dial-up

connection.

If the dial-up connection fails, perform further checks as follows:

Page 30 / 40

25

1.

Close the PPP dial-up software, and power off the HG532s. After 5

minutes, power on the HG532s, and use the PPP dial-up software

to dial again.

2. Restore the HG532s to its default settings.

If the problem persists, contact your network service provider.

Step 8

Check that the proxy server of the browser is correctly configured.

The following example uses Internet Explorer on the Windows XP

operating system to check whether the proxy server of the browser

is correctly configured:

1. Launch Internet Explorer.

2. Choose

Tools

>

Internet Options

.

3. In the

Internet Options

dialog box, click the

Connections

tab.

4. In the

Local Area Network (LAN) settings

area, click

LAN

Settings

.

5. In the

Proxy server

area of the

Local Area Network (LAN)

Settings

dialog box, check that the

Use a proxy server for your

LAN (These settings will not apply to dial

-up or VPN

connections).

check box is cleared.

Step 9

Try to access more websites to check whether the HG532s can

access these websites.

If the problem persists, contact your network service provider.

What can I do if I cannot access the web-based configuration utility?

Step 1

Refer to "What can I do if I cannot access the Internet?" to check

that the power supply, telephone line, and network line are working

properly.

Step 2

Check that the computer's IP address and the HG532s's LAN IP

address are in the same network segment, and that the browser is

not using a proxy server.

To ensure that the computer's IP address and the HG532s's

LAN IP address are in the same network segment, you can set

the computer to obtain an IP address automatically.

Step 3

Check that the correct user name and password are used to log in

to the web-based configuration utility.

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share