1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG232f
    5. /
  5. 11
Page 51 / 68 Scroll up to view Page 46 - 50
5 Configuring Frequently Used Functions
HG232f 300Mbps Wireless Router
User Guide
5-24
1.
Log in to the Web-based configuration utility of router B.
2.
In the navigation tree, choose
Basic
>
WLAN
.
The WLAN configuration page is displayed.
3.
Set the following parameters.
−
Channel: 1
−
SSID Index: SSID1
−
SSID: mySSID
−
Enable SSID: Enable
−
Security: WPA-PSK/WPA2-PSK
−
WPA Pre-Shared Key: MyPassword@2012
−
WPA Encryption: AES
4.
Click
Submit
.
Step 5
Configure the WDS function of router B.
1.
In the navigation tree, choose
Basic
>
WLAN
.
The WLAN configuration page is displayed.
2.
Click
WLAN WDS
.
3.
Select
Enable
.
4.
Select
Repeater
for
WDS Mode
.
5.
Click New.
6.
Select
mySSID
for
Select SSID
.
7.
In
MAC Address
, enter
AA:AA:AA:AA:AA:AA
.
This MAC address is the wireless MAC address of router A and is recorded in Step 1.
8.
Click
Submit
.
Step 6
Change the IP address of the LAN interface of router B.
1.
In the navigation tree, choose
Basic
>
LAN
.
The DHCP page is displayed.
2.
Under
LAN Host Settings
, enter
192.168.3.88
in
IP address
.
3.
Under
LAN Host Settings
, click
Submit
.
Step 7
Disable the DHCP server function of router B.
1.
In the navigation tree, choose
Basic
>
LAN
.
The DHCP page is displayed.
2.
Under
DHCP Server
, clear
Enable
.
Page 52 / 68
HG232f 300Mbps Wireless Router
User Guide
5 Configuring Frequently Used Functions
5-25
3.
Under
DHCP Server
, click
Submit
.
Step 8
Enable the DHCP relay function of router B.
1.
In the navigation tree, choose
Basic
>
LAN
.
The DHCP page is displayed.
2.
Under
DHCP Option Pool
, select
Computer
in
Device type
.
3.
Set
DHCP relay
to
Enable
.
4.
Click
Submit
.
5.
Repeat 2 to 4 to enable the DHCP relay function for each port in the LAN port
drop-down list box.
----End
Page 53 / 68
Page 54 / 68
HG232f 300Mbps Wireless Router
User Guide
6 Maintenance Guide
6-1
6
Maintenance Guide
6.1 Changing the User Name and Password of the
Web-based Configuration Utility
Function Overview
You can configure all the parameters of the router through the web-based configuration
utility. To prevent unauthorized parties from changing these parameters, the user name
and password are required to log in to the web-based configuration utility.
After logging in to the web-based configuration utility, you can change the user name
and password.
Configuration Example
To change the user name to
MyWebUser
and change the password to
MyWebPassword
:
Step 1
Log in to the web-based configuration utility.
Step 2
In the navigation tree, choose
Maintenance
>
Account
to display the account
management page.
Step 3
In
New user name
, enter the new user name
MyWebUser
.
Step 4
In
Current password
, enter the current password.
Step 5
In
New password
,
enter the new password
MyWebPassword
. In
Confirm password
,
enter the new password
MyWebPassword
again.
Step 6
Click
Submit
.
----End
Page 55 / 68
6 Maintenance Guide
HG232f 300Mbps Wireless Router
User Guide
6-2
If you cannot remember the user name and password that you have set, you can restore them to
their default settings by pressing and holding the
Reset
button for 6 or more seconds. Once
complete, the login information of the web-based configuration utility is restored to default
settings. When the default settings are restored, your custom data is lost. Therefore, exercise
caution when using the
Reset
button.
6.2 Changing the Login IP Address of the Web-based
Configuration Utility
Function Overview
By accessing the IP address
192.168.3.1
of the router LAN port
(the subnet mask is
255.255.255.0
), you can change this IP address according to your individual
requirements. If you change the IP address of the LAN interface, ensure that the IP
address of the computer and the IP address of the LAN interface of the router are in the
same network segment to enable the computer to access the web-based configuration
utility. Then enter the new IP address in the address bar to access the web-based
configuration utility.
Configuration Example
If the login IP address of the web-based configuration utility is
192.168.3.1
and the
subnet mask is
255.255.255.0
, change the IP address to
192.168.3.88
(the subnet mask
remains the same) by doing the following:
Step 1
Log in to the web-based configuration utility.
Step 2
In the navigation tree, choose
Basic
>
LAN
to display the LAN configuration page.
Step 3
Under the
LAN Host Settings
group box, enter the new IP address
192.168.3.88
in the
IP address
text box.
Step 4
Under
LAN Host Settings
, click
Submit
.
----End

Rate

4 / 5 based on 1 vote.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top