Page 31 / 112
                                                    Scroll up to view Page 26 - 30
                                                
                    
User Manual 
EchoLife HG520 Home Gateway 
Chapter 4 
Quick Setup 
Huawei Technologies Proprietary 
20 
II. 
Connection Type Configuration 
Figure 4-9 
Quick Setup – Connection Type and Encapsulation 
Mode 
1) 
Select “IP over ATM (IPoA)”, and the “Encapsulation Mode” 
(Please contact you ISP for the information). 
2) 
Click on <Next> to go to next step. 
 
                 
                                
                    
                        Page 32 / 112
                                            
                    
User Manual 
EchoLife HG520 Home Gateway 
Chapter 4 
Quick Setup 
Huawei Technologies Proprietary 
21 
III. 
WAN IP Settings Configuration 
Figure 4-10 
Quick Setup– WAN IP Settings 
1) 
Set WAN IP/Subnet Mask, default gateway, and DNS server 
settings. The actual parameter is provided by your ISPs, and 
you can contact them to get the detailed information. 
2) 
Click on <Next> to go to next step. 
 
                 
                                
                    
                        Page 33 / 112
                                            
                    
User Manual 
EchoLife HG520 Home Gateway 
Chapter 4 
Quick Setup 
Huawei Technologies Proprietary 
22 
IV. 
NAT, IGMP Multicast, and WAN Service Configuration 
Figure 4-11 
Quick Setup – IPoA – NAT, IGMP Multicast, and 
WAN service. 
1) 
Check to Enable/Disable NAT and Firewall functions. 
2) 
Check to Enable/Disable IGMP Multicast, and WAN Service. 
3) 
Click on <Next> to go to next step. 
 
                 
                                
                    
                        Page 34 / 112
                                            
                    
User Manual 
EchoLife HG520 Home Gateway 
Chapter 4 
Quick Setup 
Huawei Technologies Proprietary 
23 
V. 
Device Setup 
Figure 4-12 
Quick Setup – Device Setup 
1) 
Enter IP (LAN IP) Address and Subnet Mask to HG520. 
2) 
Select to Disable/Enable DHCP Server, use DHCP Server 
Relay, and configure related settings for that mode. 
3) 
Select “Configure the second IP Address and Subnet Mask 
for LAN interface” and configure if the second IP Address is 
used. 
4) 
Click on <Next> to go to next step. 
 
                 
                                
                    
                        Page 35 / 112
                                            
                    
User Manual 
EchoLife HG520 Home Gateway 
Chapter 4 
Quick Setup 
Huawei Technologies Proprietary 
24 
VI. 
Wireless Setup 
Figure 4-13 
Quick Setup – Wireless Setup 
1) 
Check “Enable Wireless” to enable wireless radio or 
uncheck to disable. 
2) 
Configure SSID,“SSID” is the network name shared among 
all devices in a wireless network. It is case-sensitive and 
must not exceed 32 alphanumeric characters. 
3) 
Click on <Next> to go to next step.