Page 36 / 112 Scroll up to view Page 31 - 35
User Manual
EchoLife HG520 Home Gateway
Chapter 4
Quick Setup
Huawei Technologies Proprietary
25
VII.
WAN Setup – Summary
Figure 4-14
Quick Setup – WAN Setup – Summary
The last page gives a summary of previous steps. Make sure that
the settings match the settings provided by ISP, and then click on
“Save/Reboot” button to complete the configuration procedure.
4.3
Configuring Bridge
Click on <Quick Setup> in the left frame, and follow the steps
below to create a Bridging connection.
Page 37 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 4
Quick Setup
Huawei Technologies Proprietary
26
I.
ATM PVC Configuration
Figure 4-15
Quick Setup – ATM PVC Configuration
1)
Enter the VPI/VCI values. Please contact you ISPs for the
information.
2)
Click on <Next> to go to next step.
Page 38 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 4
Quick Setup
Huawei Technologies Proprietary
27
II.
Connection Type Configuration
Figure 4-16
Quick Setup – Connection Type and Encapsulation
Mode
1)
Select “Bridging”, and the “Encapsulation Mode”. The actual
parameter is provided by your ISPs, and you can contact
them to get the detailed information.
2)
Click on <Next> to go to next step.
Page 39 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 4
Quick Setup
Huawei Technologies Proprietary
28
III.
WAN Service Configuration
Figure 4-17
Quick Setup – WAN Service
1)
Give a service name and check the box to enable this WAN
service.
2)
Click on <Next> to go to next step.
Page 40 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 4
Quick Setup
Huawei Technologies Proprietary
29
IV.
Device Setup
Figure 4-18
Quick Setup – Device Setup
1)
Enter LAN IP Address and Subnet Mask.
2)
Click on <Next> to go to next step.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top