Page 26 / 112 Scroll up to view Page 21 - 25
User Manual
EchoLife HG520 Home Gateway
Chapter 4
Quick Setup
Huawei Technologies Proprietary
15
±
Note:
z
HG520 activates PPPoE connection automatically when user
wants to access Internet and there is no active PPPoE connection.
z
The users are able to assign some specific ATM PVC(s) to run
PPPoE, if HG520 has multiple ATM PVC connections.
IV.
IGMP Multicast, WAN service configuration
Figure 4-4
Quick Setup – IGMP Multicast, WAN service
1)
Check to Disable/Enable IGMP Multicast, and WAN Service.
2)
Click on <Next> to go to next step.
Page 27 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 4
Quick Setup
Huawei Technologies Proprietary
16
V.
Device Setup Configuration
Figure 4-5
Quick Setup – Device Setup
1)
Enter IP (LAN IP) and Subnet Mask.
2)
Select to Disable/Enable DHCP Server, use DHCP Server
Relay, and configure related settings for that mode.
3)
HG520 will assign IP address, subnet mask, Default
gateway IP address and DNS server IP address to host
computers which connect to its LAN.
4)
Select “Configure the second IP Address and Subnet Mask
for LAN interface” and configure if the second IP Address is
used.
Page 28 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 4
Quick Setup
Huawei Technologies Proprietary
17
±
Note:
Network Address Translation (NAT)
function
is default enabled and is
not showing on the page to prevent it from being disabled.
5)
Click on <Next> to go to next step.
VI.
Wireless Configuration
Figure 4-6
Quick Setup - Wireless Setup
1)
Check “Enable Wireless” to enable wireless radio or
uncheck to disable.
Page 29 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 4
Quick Setup
Huawei Technologies Proprietary
18
2)
Configure SSID,“SSID” is the network name shared among
all devices in a wireless network. It is case-sensitive and
must not exceed 32 alphanumeric characters.
3)
Click on <Next> to go to next step.
VII.
WAN Setup – Summary
Figure 4-7
Quick Setup – WAN Setup – Summary
The last page displays a summary of previous settings. Make
sure that the configurations match the settings provided by ISP, and
then click on <Save/Reboot> button to complete the configuration
procedure.
Page 30 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 4
Quick Setup
Huawei Technologies Proprietary
19
4.2
Configuring IPoA
Click on <Quick Setup> in the left frame, and follow the steps
below to create an IPoA (Routed) connection.
I.
ATM PVC Configuration
Figure 4-8
Quick Setup – ATM PVC Configuration
1)
Enter the VPI/VCI values. The actual parameter is provided
by your ISPs, and you can contact them to get the detailed
information.
2)
Click on <Next> to go to next step.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top