1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. EchoLife-HG520c
    5. /
  5. 3
Page 11 / 25 Scroll up to view Page 6 - 10
6
2.3
Connecting Multiple Telephones
If your telephone line is used for the broadband network access, telephone connections,
and fax connections, take the following figure as a reference for connecting the cables.
#
#
#
1
3
4
5
PHONE
LINE
MODEM
2
POWER
LAN4
LAN3
LAN2
LAN1
RESET
ADSL
1
7
6
5
7
8
1. Telephone jack on
the wall
2. Splitter
3. Power adapter
4. Computer
5. Telephone
6. Fax machine
7. Microfilter
8. T connector
Page 12 / 25
7
2.4
Getting Started
To power on the HG520c, press the power button on the side panel of the HG520c.
After you power on the HG520c, the ADSL indicator blinks (for less than three
minutes), which indicates that the HG520c is being activated. Later, the ADSL
indicator turns solid on. The POWER indicator is also solid on, which indicates that the
HG520c is working properly.
3
Setting the Network-Access Parameters
By configuring the HG520c and your computer, you can choose any of the following
methods to surf the Internet:
z
Accessing the Network Through the Embedded PPP Dial-Up Software on the
HG520c
z
Accessing the Network Through the PPP Dial-Up Software on Your Computer
3.1
Accessing the Network Through the
Embedded PPP Dial-Up Software on the HG520c
If you select this method for accessing the network, the HG520c starts to set up a
dial-up connection automatically after the startup. You can access the network after you
power on your computer. You do not need to install any special dial-up software on
your computer or perform dial-up operations on your computer. To configure the
HG520c and your computer for the network access, do as follows:
Step 1
Log in to the Web-based configuration utility of the HG520c.
1.
Launch the Internet Explorer on your computer. Enter
in the address bar, and then press
Enter
.
2.
In the displayed dialog box, enter the user name and the password, and
then click
OK
.
By default, both the user name and the password are
admin
. After the user name and
the password are verified, you can access the Web-based configuration utility.
Step 2
Enable the embedded dial-up function.
1.
In the navigation tree on the left of the Web-based configuration utility,
choose
Basic
>
WAN Setting
.
2.
Select a PVC number, such as
1
, from the
PVC
drop-down combo box.
3.
Enter the VPI and VCI that are provided by the network operator in the
VPI
and
VCI
text boxes.
Page 13 / 25
8
4.
Select
Yes
from the
Active
drop-down combo box and select
Routing
from the
Mode
drop-down combo box.
5.
Select
PPPoE
from the
Encapsulation
drop-down combo box.
6.
Enter the user name and password that are provided by the network
operator in the
Username
and
Password
text boxes, and keep the default
settings of other parameters.
7.
Click
Submit
to save the settings.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer once only. The next time
when you power on your computer, you can surf the Internet without any configuration.
3.2
Accessing the Network Through the PPP
Dial-Up Software on Your Computer
If you select this method for accessing the network, you need to install and configure
the dial-up software on your computer. In addition, you need to perform dial-up
operations on your computer upon each startup. To configure the HG520c and your
computer for the network access, do as follows:
Step 1
Set the working mode of the HG520c to
Bridge
.
For details, refer to the procedure for enabling the embedded dial-up function described
in Step 2 in section 3.1 "Accessing the Network Through the Embedded PPP Dial-Up
Software on the HG520c." Note that
Bridge
is selected from the
Mode
drop-down
combo box.
Step 2
Install and configure the PPP dial-up software on your computer.
The PPP dial-up software is pre-installed on certain computer operating systems. To
create a dial-up connection, do as follows (taking the Windows XP operating system as
an example):
1.
Choose
Start
>
All Programs
>
Accessories
>
Communications
>
Network Connections
.
2.
Click
Create a new connection
in
Network Tasks
to display the
New
Connection Wizard
window, and then click
Next
.
3.
Select
Connect to the Internet
, and then click
Next
.
4.
Select
Set up my connection manually
, and then click
Next
.
5.
Select
Connect using a broadband connection that requires a user
name and password
, and then click
Next
.
6.
Enter the name (as desired) of the dial-up connection in
ISP Name
, and
then click
Next
.
7.
Select
Anyone's use
or
My use only
, and then click
Next
.
8.
Enter the user name and password provided by the network operator and
used for the dial-up connection, and then click
Next
.
Page 14 / 25
9
9.
Select
Add a shortcut to this connection to my desktop
, and then click
Finish
.
An icon for the dial-up connection is displayed on the desktop of your computer.
You need to perform the preceding operations only once for creating a network
connection. After the network connection is created, to access the network,
double-click the icon for the dial-up connection, and then click
Connect
in the
displayed dialog box.
4
Configuring the Wireless Network
Connection
If a wireless network adapter is installed on your computer, you can connect you
computer to the HG520c through a wireless connection.
The hardware installation methods and driver installation methods of
wireless network adapters provided by different companies vary from each
other. For details, see the installation guide provided by the wireless
network adapter provider.
After the installation of a wireless network adapter, you need to configure the wireless
network connection on your computer. You can configure the wireless network
connection through the software provided with the wireless network adapter. If the
Windows XP operating system is used, you can also configure the wireless network
connection through the wireless configuration software provided by Windows XP.
To configure the wireless network connection, do as follows (taking the Windows XP
operating system as an example):
Step 1
Log in to the Web-based configuration utility.
1.
Launch the Internet Explorer on your computer. Enter
in the address bar, and then press
Enter
.
2.
In the displayed dialog box, enter the user name and the password, and
then click
OK
.
By default, both the user name and the password are
admin
.
Step 2
Set the wireless network name and access password of the HG520c.
To set the wireless network name and the access password, do as follows (taking the
authentication type WPA-PSK as an example):
1.
In the navigation tree on the left of the Web-based configuration utility,
choose
Basic
>
Wireless Lan
.
2.
Select the
Enable
option button of
Access Point
.
3.
Enter a wireless network name in the
SSID
text box.
Page 15 / 25
10
4.
Select
WPA-PSK
from the
Authentication Type
drop-down combo
box.
5.
Select
TKIP
from the
Encryption
drop-down combo box.
6.
Enter an access password in the
Pre-Shared Key
text box.
7.
Click
Submit
to save the settings.
Step 3
Enable the wireless configuration service provided by Windows XP.
1.
Right-click
My Computer
, and then choose
Manage
from the shortcut
menu.
2.
In the
Computer Management
window, choose
Computer
Management (Local)
>
Services and Applications
>
Services
.
3.
From the services listed in the right pane of the
Computer Management
window, right-click
Wireless Zero Configuration
, and then choose
Properties
from the shortcut menu.
4.
In the
Wireless Zero Configuration Properties (Local Computer)
dialog box, check whether
Service status
is
Started
. If not, click the
Start
button.
5.
Click
OK
to close the dialog box. Then, close the
Computer
Management
window.
Step 4
Configure the wireless network connection on your computer.
1.
Choose
Start
>
All Programs
>
Accessories
>
Communications
>
Network Connections
.
2.
In the
Network Connections
window, right-click
Wireless Network
Connection
to display a shortcut menu, and then choose
Properties
from
the shortcut menu.
3.
In the
Wireless Network Connection Properties
dialog box, select
Wireless Networks
.
4.
Select
Use Windows to configure my wireless network settings
.
5.
Click
View Wireless Networks
.
6.
Select the wireless network that is configured in Step 2, and then click
Connect
in the lower right corner of the window.
7.
In the displayed dialog box, enter the access password that is preset in
Step 2, and then click
Connect
.
After the password is verified,
Connected
appears on the icon of the wireless network
in the wireless network list, which indicates that the computer is connected to the
HG520c through a wireless connection.
8.
Close the
Wireless Network Connection
dialog box.
9.
In the
Wireless Network Connection Properties
dialog box, click
OK
.

Rate

4.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top