Page 21 / 22 Scroll up to view Page 16 - 20
21
11.
Check that the network adapter of your Client runs properly.
12.
If the problem still persists, please consult you network operator.
What can I do if the Client cannot access the WLAN?
13.
If there are interferences or shields near the Mobile Wi-Fi, you can adjust the position
of the Mobile Wi-Fi.
14.
Check and record the following settings of your Client and your Mobile Wi-Fi: SSID,
WEP type, and key. The SSID of the Client must be ANY or the same as that of the
Mobile Wi-Fi. The WEP type and key of the Client must be the same as that of the
Mobile Wi-Fi. Otherwise, you need to change the settings.
15.
Check whether the WLAN MAC filter function is enabled on the Mobile Wi-Fi. If the
function is enabled, ensure that all relevant parameters are set correctly. See WLAN
MAC Filter on the web management page for more information.
Page 22 / 22
22
What can I do if I forgot the default IP address of the management page?
Restore the factory defaults and enter
in the address bar.
Version: V100R001_01
Part Number: 31010JKE

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top