Page 11 / 22
Scroll up to view Page 6 - 10
11
Step2: Establish a Wi-Fi Connection (Take a computer with Windows
XP
operating system as an example)
1.
Make sure that the Wi-Fi function of the Mobile Wi-Fi and the computer is enabled.
2.
Select Start > Control Panel > Network Connections > Wireless Network Connection.
Note:
To set up a Wi-Fi connection, the PC must have a wireless network adapter installed.
If Wireless Network Connection is displayed, a wireless network adapter is available.
Otherwise, check to make sure you have a wireless network adapter installed.
3.
Click View available wireless networks to display a list
of wireless networks available.
4.
Select a network indicated by the SSID of the Mobile WiFi, find the default SSID and
wireless network key on the back cover of the Mobile WiFi, and then click Connect.
Note:
If the encryption parameter is already set for the Mobile WiFi, the Wireless Network
Connection dialogbox is displayed. Enter the wireless network key in the dialog box.
5.
Wait until the wireless connection icon is displayed in the status area in the lower
right corner of the PC screen.
Page 12 / 22
12
Step3: Access the Internet
After you establish a Wi-Fi connection successfully, you can access the Internet using the
following modes.
Mode
Operations
Auto
After the Mobile WiFi is powered on, it will connect to the Internet
automatically. If there is no data transmission over a period of time,
the Mobile WiFi automatically terminates the Internet connection.
Manual
Launch the web management page and follow the prompts to
connect to or disconnect from the network.
Page 13 / 22
13
Note:
Launch the web management page to select the mode for accessing the Internet.
You can choose whether to enable the Mobile WiFi to connect to the Internet
automatically even while you are roaming. If this function is disabled, the Mobile WiFi
automatically disconnects from the Internet while you are roaming. To access the
Internet, set up a connection manually.
Accessing the Web Management Page
1.
Make sure that the connection between the Mobile WiFi and the client is a proper
one.
2.
Start the Internet browser and enter
http://3.home
in the
address bar.
3.
Enter the password and log in to the web management page.
Note:
The default password is admin.
Page 14 / 22
14
Daily Use
Power Saving Mode
If no operation is performed on the Mobile WiFi within a preset period, it will go to the
standby mode. In this mode, the battery indicator blinks slowly in green, and the other
indicators are off.
If the Mobile WiFi is powered by the battery only, choose whether to enable the Mobile
WiFi to turn off Wi-Fi automatically. If this function is enabled and no Wi-Fi devices access
the Mobile WiFi for a preset period, the Mobile WiFi turns off Wi-Fi automatically. You can
press any key to turn on Wi-Fi again.
Validating the PIN Code
If PIN code protection is enabled, log in to the web management page and follow the
prompts to enter the correct PIN code. Both PIN and PUK are delivered with the SIM card.
For details, consult your service provider.
Page 15 / 22
15
Restoring Factory Defaults
If you forget the changes you have made to some
parameters, you may restore factory defaults and
reconfigure the Mobile WiFi. To restore the factory
defaults, press and hold the RESET button until all
the indicators are off. All factory default settings
are successfully restored.
Note:
Restoring factory defaults deletes all personal
configuration settings and restores all web-based
management settings and parameters to their default values.
19216811.live