Page 21 / 77 Scroll up to view Page 16 - 20
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
18
To delete a present WAN service, click the
label that corresponds to this item to
open the web page
Delete WAN connection
.
Figure 4-5
Delete WAN settings
Click the
button to delete the service.
&
Note:
Only services created by the user can be edited. The first two items in the WAN service
list are default services.
To add a new WAN service, click the
label to open the web page
WAN Connection: create service
. To add a new service, refer to 7
Service
Configuration.
To configure the routes, click the
label to open the route configuration page.
To edit routes, refer to
4.6
Route.
4.3 DNS Relay
A DNS relay server forwards the requests received from the PCs on the LAN to the
actual DNS servers. When the unit is configured as a DNS relay server, users will not
need to change the DNS server IP address on their PC whenever their ISP changes
DNS servers, or when the user connects to a different ISP.
Click
WAN Setup
in the Main menu and choose the
DNS Relay
tab in the Main Frame
to open the DNS configuration page.
Page 22 / 77
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
19
Figure 4-6
DNS relay
This page allows you to:
Edit a DNS server address present in the DNS relay list.
Add a new DNS server to the DNS relay list.
Delete a present DSN server.
To edit a present DNS server item, modify the server
s IP address and click the
button.
To delete a present DNS server, check the corresponding check box
and click the
button.
To add a new DNS server, enter the server
s IP address, and then click the
button. For more details about IP address, refer to 6.1 IP Addresses.
&
Note:
In DNS Server list, the first address should correspond to the Primary DNS server; the
second address should correspond to the Secondary DNS server, and so on. You
cannot have more than three addresses at a time.
4.4 LAN Setting
Click
LAN Setup
in the Main menu and choose the
LAN
tab in the Main Frame to open
the LAN configuration page.
Page 23 / 77
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
20
Figure 4-7
LAN setting
This page allows you to:
View and modify the LAN IP address and subnet mask.
Advanced configuration about LAN setting.
Edit a route.
Create a virtual interface.
Edit the current virtual interface.
Delete the current virtual interface.
To modify the LAN IP address and subnet mask, enter the IP address and/or subnet
mask, and then click the
button. For more details about IP address, refer to
6.1
IP Addresses.
To configure the advanced attributes about LAN settings, click the
label to
open the web page
Edit iplan.
If needed, change the values of options, and then click
the
button.
Page 24 / 77
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
21
Figure 4-8
Edit iplan interface
To configure the routes, click the
label to open the route configuration page.
To edit routes, refer to 4.6
Route.
To create a new virtual interface, click
Create a new virtual interface
to enter the
Create virtual interface
page. Input an IP address for the virtual interface and/or a
subnet (Note that the IP address of the virtual interface must not belong to the same
subnet as that of the LAN interface), and then press
Apply
to enable it. Refer to 6.1
IP
Addresses for more information about IP address. The virtual interface created here
can be used for DMZ configuration. Refer to 4.8 DMZ Configuration for more
information.
To edit the current virtual interface, click <
Edit
>
.
Then in the new page, change the
settings if necessary, and press <change> to confirm your changes.
To delete the current virtual interface, click <
Delete
>. Then in the new page, click
<
Delete this connection
> to confirm your deletion.
&
Note:
Only after the user has created a virtual interface can you create a new security
interface in
Security Interface Configuration
page, refer to 4.7
Security Interface for
more information.
4.5 DHCP
As a DHCP server, the unit maintains a pool of IP addresses and distributes them to
LAN hosts whenever those hosts are switched on.
Page 25 / 77
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
22
Click
LAN Setup
in the Main menu and choose the
DHCP
tab in the Main Frame to
open the DHCP configuration page.
Figure 4-9
DHCP setting
This page allows you to:
Enable/disable the DHCP server.
Assign the DHCP server address pool.
If the DHCP server is currently disabled, you may click the
button to enable it.
If the DHCP server is currently enabled, you may click the
button to disable
it.
The DHCP server (if enabled) will use the address pool defined in this page to provide
IP addresses to requesting DHCP clients. You may check the
Use the default range
box
to assign a suitable default IP address pool on this subnet (recommended). If
needed, you can change the DHCP address pool manually, but you must uncheck the
Use the default range
box in the meantime.
To change the DHCP address pool manually, enter the start IP address and/or end IP
address, and then click the
button. For more details about IP address, refer to 6.1
IP Addresses.
Enter a DNS suffix in the
Local domain name
box as needed. This option is usually
used for small- to moderate-sized enterprises. Common home users do not need to set
it.
4.6 Route
This option allows you to create static IP routes to destination addresses via an IP
interface name or a gateway address.
To access the route configuration page, follow anyone of these steps:

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top