Page 11 / 20
Scroll up to view Page 6 - 10
–6–
The following table lists the functions of the ports on the rear panel.
Port
Description
POWER
The interface is used to connect to the output interface of the power
adapter.
TEL
The interfaces are used to connect a telephone line.
LAN
The interfaces are used to connect the CPE to the computer.
Side Panel
RESET
Button
Description
RESET
Press and hold the button for one to eight seconds to restart the
CPE.
Press and hold the button for over eight seconds to restore the
default settings of the CPE.
Once you restore the default settings, all the customized
data will be lost. Use this function with caution.
Page 12 / 20
–7–
04
Preparing for Installation
Selecting a Proper Installation Position
Obstacles such as concrete or wooden walls may affect the transmission of
WiMAX network signals. Therefore, install the CPE in an open space.
Keep the CPE away from any household appliance that produces a strong
electric or magnetic field, such as a microwave oven, a refrigerator, or a
satellite dish antenna.
Connecting Cables
CAUTION
During lightning weather, power off the CPE and disconnect it from the
power supply. Do not touch the antenna.
BM632/BM622/BM652
•
•
Page 13 / 20
–8–
BM631a
When the cables are connected correctly, the CPE will search for a WiMAX
network automatically. After accessing the network successfully, the CPE
can be used.
Connecting the External Antenna (Optional)
CAUTION
Do not use the external antenna outdoors.
During lightning storms, stop using the external antenna, and
disconnect it from the CPE.
•
•
Two external antennas can be connected to the CPE at a time. If only one
antenna is connected, connect it to the main antenna interface labeled with
. Otherwise, the CPE may fail to work normally. To connect an external antenna,
do as follows:
Power off the CPE.
a.
Page 14 / 20
–9–
Connect the external antenna to the CPE.
Put the external antenna in an open space without any obstacle surrounded,
to ensure good reception of
network signals.
The schematic figure is only for your reference. The actual external antenna
may differ.
RESET
External Antenna
05
Logging in to the Web UI
Take the Windows XP operating system and the Internet Explorer 6.0 as
examples.
Ensure that the CPE is connected to the PC. If you log in to the Web-based
utility of the CPE for the first time, do as follows:
Set the IP address of the PC and ensure that the IP address of the PC is in
the same network segment as that of the CPE.
By default, the IP address of the CPE is
192.168.1.1 and the subnet mask
of the CPE is 255.255.255.0.
It is recommended that the IP address and DNS settings be obtained
automatically.
•
•
Start the Internet Explorer, enter
in the address bar,
b.
c.
a.
b.
Page 15 / 20
–10–
and then press
Enter
.
Enter the correct user name and password in the displayed Web-based
utility, and then click the Login button.
Both the initial user name and password are
user
.
After the user name and the password are verified, you can perform
operations on the Web-based utility.
For details about the settings of advanced parameters, see the online
help in the Web-based utility.
To read the online help, you need to install the Adobe Reader 6.0 or later
versions.
•
•
c.
d.
19216811.live