Huawei B593s-22 Router Manual PDF (Setup & Configuration Guide)

Page 41 / 52 Scroll up to view Page 36 - 40

Online Help

8 VoIP

Huawei Proprietary and Confidential

36

To add a speed dial number, perform the following steps:

1.

Choose

VoIP

>

Speed Dial

.

2.

Click

Add

.

3.

In the

Speed Dial Number

box, enter an easily remembered number.

4.

In the

Actual Number

box, enter the actual telephone number.

5.

In the

Description

box, enter a description for the speed dial number.

6.

Click

Submit

.

----End

To modify a speed dial number, perform the following steps:

1.

Choose

VoIP

>

Speed Dial

.

2.

Choose the item to be modified, and click

Edit

.

3.

Repeat steps 3 through 5 in the previous procedure.

4.

Click

Submit

.

----End

To delete a speed dial number, perform the following steps:

1.

Choose

VoIP

>

Speed Dial

.

2.

Choose the number to be deleted, and click

Delete

.

3.

Click

OK

.

----End

To delete all speed dial numbers, perform the following steps:

1.

Choose

VoIP

>

Speed Dial

.

2.

Click

Delete All

.

3.

Click

OK

.

----End

8.5 Setting Advanced SIP Parameters

On the

Advanced SIP

page, you can set advanced SIP parameters. It is recommended that

you retain the default settings.

To set the advanced SIP parameters, perform the following steps:

1.

Choose

VoIP

>

Advanced SIP

.

2.

Set the following parameters:

Page 42 / 52

Online Help

8 VoIP

Huawei Proprietary and Confidential

37



Registration timeout (seconds)

: specifies the validity period for registration. The value

ranges from 60 to 65535.



Session timeout (seconds)

: specifies the validity period for a server session. The value

ranges from 100 to 3600.



Minimum session timeout (seconds)

: specifies the shortest validity period for a server

session. The value ranges from 90 to 1800. If you set both

Minimum session timeout

(seconds)

and

Session timeout (seconds)

, the

Minimum session timeout (seconds)

settings prevail.



Call waiting

: specifies whether to enable call waiting.

3.

Click

Submit

.

----End

8.6 Setting Advanced Voice Parameters

On the

Advanced Voice

page, you can set advanced voice parameters. It is recommended that

you retain the default settings.

To set the advanced voice parameters, perform the following steps:

1.

Choose

VoIP

>

Advanced Voice

.

2.

Set the following parameters:



DTMF Method

: specifies the Dual Tone Multi-Frequency (DTMF) transmission mode.



Fax Option

: specifies the Fax over IP mode.



Country/Region

: specifies the country or region where the CPE is located.

If you change the

Country/Region

settings, you must restart the CPE for the

settings to take effect.



Outgoing List

: Select the primary outgoing account from the drop-down list.



RTP Start Port

: specifies the Real-time Transfer Protocol (RTP) port number. The

value is an even number ranging from 50000 to 65514.



Set other parameters, it is recommended that you retain the default settings.

3.

Click

Submit

.

----End

8.7 Setting Advanced Codec Parameters

On the

Advanced Codec

page, you can set advanced voice codec parameters. It is

recommended that you retain the default settings.

To set the advanced codec parameters, perform the following steps:

1.

Choose

VoIP

>

Advanced Codec

.

Page 43 / 52

Online Help

8 VoIP

Huawei Proprietary and Confidential

38

2.

Set the following parameters:



Primary codec type

: specifies the primary voice codec type. The default value is

G.711-PCMA

.



Secondary codec type

: specifies the secondary voice codec type. The default value is

G.711-PCMU

.



Third codec type

: specifies the third voice codec type. The default value is

G.726-32

.



Fourth codec type

: specifies the fourth voice codec type. The default value is

G.726-24

.



Fifth codec type

: specifies the fifth voice codec type. The default value is

G.729

.



Sixth codec type

: specifies the sixth voice codec type. The default value is

G.722

.

3.

Click

Submit

.

----End

Page 44 / 52

Online Help

9 System

Huawei Proprietary and Confidential

39

9

System

9.1 Maintenance

9.1.1 Restart

This function enables you to restart the CPE. Settings take effect only after the CPE restarts.

To restart the CPE, perform the following steps:

1.

Choose

System

>

Maintenance

.

2.

Click

Restart

.

3.

Click

OK

.

The CPE then restarts.

----End

9.1.2 Reset

This function enables you to restore the CPE to its default settings.

To restore the CPE, perform the following steps:

1.

Choose

System

>

Maintenance

.

2.

Click

Reset

.

3.

Click

OK

.

The CPE is then restored to its default settings.

----End

9.1.3 Downloading a Configuration File

You can download the existing configuration file to back it up. To do so:

1.

Choose

System

>

Maintenance

.

2.

Click

Download

on the Maintenance page.

In the displayed dialog box, select the save path and name of the configuration file to be

backed up.

3.

Click

Save

.

The procedure for file downloading may vary with the browser you are using.

----End

Page 45 / 52

Online Help

9 System

Huawei Proprietary and Confidential

40

9.1.4 Uploading a Configuration File

You can upload a backed up configuration file to restore the CPE. To do so:

1.

Choose

System

>

Maintenance

.

2.

Click

Browse

on the

Maintenance

page.

In the displayed dialog box, select the backed up configuration file.

3.

Click

Open

.

The dialog box closes. In the box to the right of

Configuration file

, the save path and name

of the backed up configuration file are displayed.

4.

Click

Upload

.

5.

Click

OK

.

The CPE uploads the backed up configuration file. The CPE then automatically restarts.

----End

9.2 Changing the Password

This function enables you to change the login password of the admin user. After the password

changes, enter the new password the next time you log in.

To change the password, perform the following steps:

1.

Choose

System

>

Change Password

.

2.

Enter the current password, set a new password, and confirm the new password.

New password

and

Confirm password

must contain 8 to 15 ASCII characters.

3.

Click

Submit

.

----End

9.3 Setting the Date and Time

You can set the system time manually or synchronize it with the network. If you select

Sync

from network

, the CPE regularly synchronizes the time with the specified Network Time

Protocol (NTP) server. If you enable daylight saving time (DST), the CPE also adjusts the

system time for DST.

To set the date and time, perform the following steps:

1.

Choose

System

>

Date & Time

.

2.

Select

Set manually

.

3.

Set

Local time

or click

Sync from PC

to automatically fill in the current local system time.

4.

Click

Submit

.

----End

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share