Page 26 / 33
Scroll up to view Page 21 - 25
25
By default, the IP address of the CPE is
192.168.1.1 and the subnet mask is
255.255.255.0. If the CPE is working as a router, it is recommended that the IP
address and DNS settings be obtained automatically.
3.
Run the Internet Explorer, enter
in the address bar and press
Enter
.
4.
Enter the password in the login window that opens, and then select
Log In
. After the
password is verified, you can perform operations on the Web-Based Utility.
For More Information
For information about more settings and configuration, you can access the Web-Based
Utility and select
to refer to the online help.
To read the online help, you need to install the Adobe Reader 6.0 to later versions.
Page 27 / 33
26
FAQ
The power indicator is not on.
Check whether the power supply is properly connected.
Check whether the power adapter meets the requirements on specifications.
Calls cannot get through.
Ensure that the telephone is working normally and the telephone line is connected
correctly.
Ensure that the CPE works in LTE mode. Otherwise, the VoIP service cannot be used.
Ensure that the VoIP service is correctly configured in the Web-Based Utility.
If the problem persists, contact the local service provider.
The Web-Based Utility cannot be accessed.
Ensure that the CPE is started.
Ensure that the network cable between the CPE and the computer is properly
connected.
Ensure that the IP address of the computer is correct.
Page 28 / 33
27
If the problem persists, contact the local service provider.
The wireless network cannot be detected.
Check whether the power adapter is correctly connected.
Ensure that the CPE is placed in open environments and far away from concrete or
wooden obstacles.
Keep the CPE away from the household electrical appliances that produce strong
electric or magnetic fields, such as micro-wave ovens, refrigerators, or disc satellite
antennas.
If the problem persists, contact the local service provider.
The power adapter of the CPE is overheated.
Shut down the CPE when it is not used. Otherwise, the CPE may be overheated after
running for a long time.
Place the CPE in cool and draughty environments.
Page 29 / 33
28
Specifications
Wireless Network
Standard
FDD-LTE R8 2009Q4
WCDMA/HSDPA R5/HSUPA R6/HSPA+ R7/DC-HSPA+ R8
GSM/GPRS/EGPRS R99
Frequency
LTE: DD800, 900, 1800, 2100, 2600
UMTS: 900, 2100
GSM: 850, 900, 1800, 1900
Port
LAN
Four Fast Ethernet (FE) ports
TEL
Two common telephone ports
USB
Two USB host ports
SIM
One SIM slot
Page 30 / 33
29
Wi-Fi
Standard
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Others
Ambient temperature for
operation
0
˚C to
40
˚C
Relative
humidity
for
operation
5% to 95%, non-condensing
Power adapter input
100 to 240 V AC, 50 Hz
Power adapter output
12 V DC, 2 A
Power consumption
< 20 W
Weight
About 500 g
Dimensions (L x W x H)
About 190 mm x 35 mm x 165 mm
19216811.live