Page 16 / 33
Scroll up to view Page 11 - 15
15
Indicator
State
Description
Off
The CPE is powered off.
TEL1/TEL2
On
This indicator is on when the CPE of the calling or called
party is in off-hook state.
Blinking
This indicator blinks when the CPE is not switched to the
off-hook state during a call.
Off
This indicator is off when the CPE is hooked off and there is
no calling party.
MODE
Blue
This indicator is constantly blue when the CPE has
accessed the LTE network but no data is transferred.
This indicator is blinking blue when the CPE has accessed
the LTE network and data is transferred.
Green
This indicator is constantly green when the CPE has
accessed the UMTS network but no data is transferred.
This indicator is blinking green when the CPE has
accessed the UMTS network and data is transferred.
Orange
This indicator is constantly orange when the CPE has
accessed the GSM network but no data is transferred.
This indicator is blinking orange when the CPE has
accessed the GSM network and data is transferred.
White
This indicator is blinking white when the CPE is accessing
the wireless network.
Page 17 / 33
16
Indicator
State
Description
Red
This indicator is constantly red when the CPE fails to
access the wireless network or the CPE does not access
the wireless network.
Mulberry
This indicator is on when the SIM cannot be identified or the
PIN is not entered or the PIN check fails.
Off
This indicator is off when the CPE does not access the
wireless network.
WLAN
On
The WLAN function is enabled.
Blinking
This indicator is blinking when data is transferred through
the WLAN.
Off
The WLAN function is disabled.
LAN1
–
LAN4
On
This indicator is on when an Ethernet device has been
connected to the relevant port.
Blinking
Data is being transmitted over the corresponding port.
Off
This indicator is off when an Ethernet device is not
connected to the relevant port.
SIGNAL
On
This is a five-bar indicator. The more bars that are on, the
stronger the wireless signals.
Off
This indicator is off when no signal is detected.
Page 18 / 33
17
Indicator
State
Description
WPS
Regular
blinking
Authentication for WPS accessing is implementing. The
indicator blinks not more than two minutes.
Irregular
blinking
An event or alarm occurs. You need to log in to the WEB UI
and perform related operations.
On
The WPS function is enabled.
Off
The WPS function is disabled.
All indicators
except
the
POWER
indicator
Blinking
The CPE is performing an update configuration, such as an
upgrade or resetting. In this period, to prevent a serious
damage, do not power off the CPE.
On: An indicator is turned on.
Blinking: An indicator blinks at regular intervals.
Regular blinking: This indicator blinks at regular intervals, such as on for 0.5s and
off for 0.5s.
Irregular blinking: This indicator blinks at irregular intervals. For example: in each
1.6s, the indicator remains on for two short periods of 0.3s with a quick blink
between them and then remains off for 1s.
Off: An indicator is turned off.
Page 19 / 33
18
Ports and Buttons
Item
Description
POWER
This port is for connecting to a power adapter.
TEL1/TEL2
These ports are connecting to telephones or faxes (optional).
LAN1
–
LAN4
These ports are for connecting to computers, switches, or other LAN
devices.
RESET
You can restart the CPE by holding down this button for 2 to 5
seconds.
You can restore the default settings of the CPE by holding down this
button for more than 5 seconds.
Restoring the default settings of the CPE will override all the
previous settings.
WLAN
You can enable/disable the WLAN function by holding down this
button for 2 to 3 seconds.
Page 20 / 33
19
Item
Description
You can enable the Wi-Fi function by holding down this button for
more than 3 seconds.
WPS
This is the WPS switch.
SIM
This slot is for inserting the SIM.
USB
This port is for inserting the USB device.
This port is not for connecting the USB host device, such as a PC.
19216811.live