11

Huawei B593 – trådlös 4G-router

Specifikationer

Anslutningsformer:

2G / 3G / 4G / wlan

Ta emot data:

4G

– upp till 100 Mbit/s

3G

– upp till 42 Mbit/s

2G

– upp till 236 kbit/s

Skicka data:

4G

– upp till 50 Mbit/s

3G

– upp till 5,76 Mbit/s

2G

– upp till 236 kbit/s

Hastigheten påverkas av en mängd faktorer: Vilket abonnemang du valt, täckningen där du är,

hur många som är anslutna till det trådlösa nätverket, routerns placering i rummet, avståndet

mellan datorn och routern etc.

Fungerar med

alla enheter som stödjer WiFi eller Ethernet, stöder upp till 32 enheter.

Operativsystem:

Windows XP / Windows Vista / Windows 7 / Mac OS X

Webbläsare för inställningsprogram:

Explorer 7.0 / Firefox 3.5 / Opera 10 / Safari 5 /

Chrome 9 – eller senare versioner

Säkerhetsföreskrifter

• Utsätt inte routern för extremt höga eller låga temperaturer, vatten eller fuktighet.

• Försök inte att demontera routern, bara kvalificerad personal har tillåtelse att utföra underhåll.

• Använd inte routern intill starka elektriska eller magnetiska fält – t.ex. mikrovågsugnar.

• Stäng av routern innan du drar ur strömsladden.

• Använd inte routern där trådlösa enheter är förbjudna, som t.ex. ombord på flygplan

eller på vissa sjukhus.

Uppdatering av routerns mjukvara (firmware)

Du får ett meddelande när en ny mjukvaruuppdatering finns tillgänglig. Tacka alltid ja till dessa

uppdateringar – de rättar till eventuella fel och förbättrar din routers prestanda.

12

UK

Share your 4G, in a wireless network

Just follow the instructions in the manual, and you will soon be up and

running with your wireless network and mobile broadband – super-fast

and secure via 4G.

Before connecting your router we advise that you check that you have

received all the required components. Your package should contain:

Huawei B593 4G router with a power adapter, this quick guide,

2 antennas and a network cable (1.5 m).

Getting to know your 4G router

(see illustrations on pages 4–5)

1

Light-emitting diodes (LEDs)

During updates all diodes will flash except POWER. Do not turn the router off

during updates, as this can cause serious damage.

POWER

•

Lit

when the router is turned on.

WLAN

•

Lit

when the wireless transfer function is activated.

•

Flashes when data is being transferred over your wireless

network (WLAN).

WPS

•

Indicates WPS (Wi-Fi Protected Setup).*

TEL1/ TEL2

• Indicates a VOIP call.

13

2

LEDs for signal strength

3

Slot for SIM card

4

On/off switch

5

USB port

6

Socket for power cable

7

Port for telephone

Service not available in some countries.

8

Port for a computer or

network printer (LAN)

9

LED for LAN

10

WPS button

After activating WPS (Wi-Fi Protected Setup) in

your router’s setup management,* you can

connect computers to the wireless network with-

out a security key by pressing the WPS button.

11

Reset button

Press and hold down the button for more than

5 seconds to restore factory settings on your

4G router.

12

WLAN button

Press and hold down the button for 2–3 seconds

to activate/deactivate the WLAN function.

*) The function is not activated in factory settings. The function is activated in the router’s setup

management (see next spread) – read more under General settings and WLAN WPS.

1

LEDs (cont.)

MODE

•

White flashing light

= Connection being established

•

Blue light

= Connected via 4G

•

Green Llght

= Connected via 3G

•

Orange light

= Connected via 2G

•

Red light

= No connection to wireless network (WLAN).

•

Purple light

= Problem with SIM card or PIN code

Flashes

when data is transferred

14

UK

Connecting your 4G router

1

Insert your SIM card

The SIM card slot is on the side of the router.

2

Connect the antennas

3

Start the router

Connect the router to a power socket and turn it on by pressing the

on/off button.

4

Connect your computer to the router

On the back of the router is a label with information that you will need.

Make sure Wireless Network is activated on your computer.

a) Your computer will discover any available wireless networks. Select

your network name (WLAN – Name) from the list which is displayed

where you select a network connection.

b) When prompted, enter your security key (WLAN – Key).

c) You are done when you can see on your computer that you are

connected to a wireless network.

15

5

Enter your PIN code and connect to the Internet

The first time you connect to the Internet you will need to enter your

SIM card’s PIN code in the router’s setup management.

a) Launch your computer’s web browser (e.g. Internet Explorer or Safari)

and enter

in the address field. Log in using the

password

admin

.

b) Enter your SIM card’s

PIN code

in the field and click

Send

.

By default the router has been set up to automatically create a mobile data connection.

6

Done!

You can now start surfing with your 4G router via your wireless network

(WLAN) – or via a network cable connected to one of the LAN ports.

The setup management for your 4G router

The setup management allows you to make more advanced configurations of your 4G

router (e.g. changing your APN profile). It also contains a more detailed manual – just

click on the question mark. The setup management is opened in your web browser.

Address:

Password:

admin