Huawei B2268H Router Manual PDF (Setup & Configuration Guide)

Page 141 / 155 Scroll up to view Page 136 - 140

LTE TDD B2268H

User Guide

21 Log Setting

Issue 01 (2014-01-15)

134

Table 21-1

Maintenance > Log Setting

LABEL

DESCRIPTION

Syslog Setting

Syslog Logging

The LTE Device sends a log to an external syslog server. Select the

Enable

check box to enable syslog logging.

Syslog Server

Enter the server name or IP address of the syslog server that will log the

selected categories of logs.

UDP Port

Enter the port number used by the syslog server.

Active Log and Select Level

Log Category

Select the categories of logs that you want to record.

Log Level

Select the severity level of logs that you want to record. If you want to

record all logs, select

ALL

.

Apply

Click

Apply

to save your changes.

Cancel

Click

Cancel

to restore your previously saved settings.

Page 142 / 155

LTE TDD B2268H

User Guide

22 Software Upgrade

Issue 01 (2014-01-15)

135

22

Software Upgrade

22.1 Overview

This chapter explains how to upload new firmware to your LTE Device.

Only use firmware for your device's specific model. Refer to the label on the bottom of your

LTE Device.

22.2 FOTA Upgrade

Your LTE Device supports Firmware update Over The Air (FOTA).

Click

Maintenance > Software Upgrade

to open the

following

screen.

Enter the update server in URL, click

SAVE URL

button to save the server URL;

Click

CHECK

button to check new firmware available from the server;

Please note the server URL is provided by your service provider and must match your CPE

model.

Please refer to Table 22-1 for the definition of the

Check

and

SaveURL

buttons.

Page 143 / 155

LTE TDD B2268H

User Guide

22 Software Upgrade

Issue 01 (2014-01-15)

136

If there is new firmware to upgrade, a popup window will display to show the new firmware

info and ask for your permission to proceed.

Figure 22-1

New firmware files are available for both the IDU and ODU

Figure 22-2

Only a new firmware file is available for the IDU

Page 144 / 155

LTE TDD B2268H

User Guide

22 Software Upgrade

Issue 01 (2014-01-15)

137

Once the Yes button is pressed, the LTE Device will download, update and restart itself after

you confirm the download action. During the process, you will see a popup window to show

the system is upgrading.

Figure 22-3

System upgrading

Normally, the upgrade process may take around 6 minutes for both the IDU and ODU. The

login page appears again after the upgrade is done.

In the FOTA process, you only need to confirm whether to update or not without using any other

update software tools and hardware devices.

If the FOTA process fails, the LTE Device will go back to the previous firmware version and

state.

22.3 The Software Upgrade

Click

Maintenance > Software Upgrade

to open the

following

screen. The upload process

uses HTTP (Hypertext Transfer Protocol) and may take up to three minutes. After a successful

upload, the system will reboot.

Do NOT turn off the LTE Device while firmware upload is in progress!

Figure 22-4

Maintenance > Software Upgrade

The following table describes the labels in this screen.

Table 22-1

Maintenance > Software Upgrade

LABEL

DESCRIPTION

Upgrade Software

Page 145 / 155

LTE TDD B2268H

User Guide

22 Software Upgrade

Issue 01 (2014-01-15)

138

LABEL

DESCRIPTION

Current

Software

Version

This is the present Firmware version.

File Path

Type in the location of the file you want to upload in this field or click

Browse ... to find it.

Browse...

Click this to find the .bin file you want to upload. Remember that you

must decompress compressed (.zip) files before you can upload them.

Upload

Click this to begin the upload process. This process may take up to three

minutes.

Check New Firmware from Server

Check

Enter the IP address or URL of the update server and click the

Check

button to check if a new firmware file is available on the server.

SaveURL

Click this to save the specified server URL so it can be used after a power

cycle.

After you see the firmware updating screen, wait a few minutes before logging into the LTE

Device again.

Figure 22-5

Firmware Uploading

The LTE Device automatically restarts in this time causing a temporary network disconnect. In

some operating systems, you may see the following icon on your desktop.

Figure 22-6

Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the

Status

screen.

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share