Page 131 / 155
Scroll up to view Page 126 - 130
LTE TDD B2268H
User Guide
16 Traffic Status
Issue 01 (2014-01-15)
Copyright © Huawei Technologies Co., Ltd.
124
LABEL
DESCRIPTION
Last Outgoing
Number
This field displays the last number the SIP account called. The field is
blank if the SIP account has never dialed a number.
Call Status
Account
This column displays the SIP account in the LTE Device.
Duration
This field displays how long the current call has lasted.
Status
This field displays the current state of the phone call.
Idle
- There are no current VoIP calls, incoming calls or outgoing calls
being made.
Dial
- The called phone is ringing.
Ring
- The phone is ringing for an incoming VoIP call.
Process
- There is a VoIP call in progress.
DISC
- The called line is busy, the called line has hung up or the phone
was left off the hook.
Codec
This field displays what voice codec is being used for a current VoIP call
through a phone port.
Peer Number
This field displays the SIP number of the party that is currently engaged
in a VoIP call through a phone port.
Phone Status
Account
This field displays the phone accounts of the LTE Device.
Outgoing
Number
This field displays the SIP number that you use to make calls on this
phone port.
Incoming
Number
This field displays the SIP number that you use to receive calls on this
phone port.
Phone State
This field shows whether or the phone connected to the subscriber port is
on-hook
ONHOOK
) or off-hook (
OFFHOOK
).
Page 132 / 155
LTE TDD B2268H
User Guide
17 User Account
Issue 01 (2014-01-15)
Copyright © Huawei Technologies Co., Ltd.
125
17
User Account
17.1 Overview
You can configure system password for different user accounts in the
User Account
screen.
17.2 The User Account Screen
Use the
User Account
screen to configure system password.
Click
Maintenance > User Account
to open the following screen.
Figure 17-1
Maintenance > User Account
The following table describes the labels in this screen.
Table 17-1
Maintenance > User Account
LABEL
DESCRIPTION
User Name
You can configure the password for the
Power User
and
Admin
accounts.
Old Password
Type the default password or the existing password you use to access the
system in this field.
New Password
Type your new system password (up to 30 characters). Note that as you
type a password, the screen displays a (*) for each character you type.
After you change the password, use the new password to access the LTE
Device.
Retype to
Confirm
Type the new password again for confirmation.
Page 133 / 155
LTE TDD B2268H
User Guide
17 User Account
Issue 01 (2014-01-15)
Copyright © Huawei Technologies Co., Ltd.
126
LABEL
DESCRIPTION
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Page 134 / 155
LTE TDD B2268H
User Guide
18 Remote MGMT
Issue 01 (2014-01-15)
Copyright © Huawei Technologies Co., Ltd.
127
18
Remote MGMT
18.1 Overview
Remote MGMT
allows you to manage your LTE Device from a remote location through the
following interfaces:
LAN and WLAN
WAN only
The LTE Device is managed using the web configurator.
18.1.1 What You Need to Know
The following terms and concepts may help as you read this chapter.
18.2 The Remote MGMT Screen
Use this screen to decide what services you may use to access which LTE Device interface.
Click
Maintenance > Remote MGMT
to open the following screen.
Figure 18-1
Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 18-1
Maintenance > Remote MGMT
LABEL
DESCRIPTION
Services
This is the service you may use to access the LTE Device.
Page 135 / 155
LTE TDD B2268H
User Guide
18 Remote MGMT
Issue 01 (2014-01-15)
Copyright © Huawei Technologies Co., Ltd.
128
LABEL
DESCRIPTION
LAN/WLAN
Select the
Enable
check box for the corresponding services that you
want to allow access to the LTE Device from the LAN and WLAN.
WAN
Select the
Enable
check box for the corresponding services that you
want to allow access to the LTE Device from the WAN.
Port
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for remote
management.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
19216811.live