Page 11 / 36
Scroll up to view Page 6 - 10
11
2. Choose the connection type then click the
“
NEXT
”
button.
Static IP:
If your broadband ISP provides you a static IP, please select
Static IP mode.
Dynamic IP:
If your ISP uses DHCP server, please select DHCP and your
ISP will automatically assign these values to you (includes the DNS
server).
PPPoE:
Inquire with your ISP to make sure you can use PPPoE. Enter your
username and password provided by your ISP.
3. In this setting, you can set the wireless name and wireless password
for your local network. Then click
the “
NEXT
”
button. You have
configured the adapter to work as a router. Click the
“
Save
”
button
to confirm the settings.
Page 12 / 36
12
3.3.1
WISP
In WISP mode, wirelessly connect to an ISP station/hotspot to share
Internet to local wireless and wired networks.
1.
If you want to set the adapter in WISP mode, choose WISP, then
click the
“NEXT”
button
；
Page 13 / 36
13
2.
Click Open Scan to search Wi-Fi signal. Select your Wi-Fi and enter
the password, then click NEXT.
Page 14 / 36
14
3.
Set the pass phrase of the Wi-Fi of the adapter, then click the
“
NEXT
” button
. (Default pass phrase: 11111111)
4.
You are configuring the device to work in WISP mode. If you have
confirmed the settings, please click the
“
Save
”
button to reboot the
device and activate the configurations.
Page 15 / 36
15
3.3.2
AP Mode
In AP mode, you can translate your existing wired network to a wireless
network.
1.
If you want to set the adapter in AP mode, choose AP, then click
the “NEXT” button.
2.
In Wireless Settings, you can set the wireless network name and
wireless password for your local network, please remember the Wi-Fi
password. When you finish the settings, click NEXT.
19216811.live