Page 11 / 71
Scroll up to view Page 6 - 10
9
WLAN ADSL2+ Router
If you have a PSTN telephone line (normal analog line)
connect the router as shown
below:
1.
Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to any of the 4
WLAN ADSL2+ Router's LAN Ports.
2.
Connect the supplied RJ11 telephone cable from your home's telephone jack to the “
LINE
”
port of the supplied splitter. Connect the other supplied RJ11 telephone cable to the “
DSL
”
port of the splitter and connect the other end of this cable to the “
LINE
” port of your WLAN
ADSL2+ Router. (If there is no option Splitter, please connect the supplied RJ11 telephone
cable from your home's telephone jack to the “
LINE
” port of your WLAN ADSL2+ Router.)
3.
Connect a RJ11 telephone cable to the “
PHONE
” port of the splitter and connect the other
end to your telephone.
4.
Connect the power adapter to the power inlet “
POWER
” of the WLAN ADSL2+ Router and
turn the “
ON/OFF SWITCH
” switch of your WLAN ADSL2+ Router on.
Page 12 / 71
10
WLAN ADSL2+ Router
5.0 Configuration Procedures
Before starting the WLAN ADSL2+ Router configuration, please kindly configure the PC
computer as below, to have automatic IP address / DNS Server.
For Windows 98SE/ME/2000/XP
1. Click on “
Start
”
->
“
Control Panel
”
(in Classic View)
. In the Control Panel; double click on
“
Network Connections
”
to continue.
2.
Single RIGHT click on
“
Local Area connection
”
,
then click
“
Properties
”.
Page 13 / 71
11
WLAN ADSL2+ Router
3.
Double
click on “
Internet Protocol (TCP/IP)
”.
4. Check “
Obtain an IP address automatically
” and “
Obtain DNS server address
automatically
” then click on “
OK
”
to continue.
5. Click “
Show icon in notification area when connected
” (see screen image in 3. above)
then click on “
OK
”
to complete the setup procedures
.
Page 14 / 71
12
WLAN ADSL2+ Router
For Windows Vista-32/64
1. Click on “
Start
” -> “
Control Panel
” -> “
Network and Sharing Center
”.
2.
In the Manage network connections, click on “
Manage network connections
” to
continue.
Page 15 / 71
13
WLAN ADSL2+ Router
3.
Single RIGHT click on “
Local Area connection
”, then click “
Properties
”.
4.
The screen will display the information
“
User Account Control
” and click
“
Continue
” to continue.
5.
Double
click on “
Internet Protocol Version 4 (TCP/IPv4)
”.
19216811.live