34

WLAN ADSL2+ Router

System Time

Go to

Maintenance->Time Zone

and select system time as you wish.

Connecting to a Simple Network Time Protocol (SNTP) server allows the router to synchronize

the system clock to the global Internet.

The synchronized clock in the router is used to recorded the security log and control client

filtering.

Admin Setting

Go to

Maintenance-> Administration

to set a new username and password to restrict

management access to the router.

The default is

admin (Username)

and

1234 (Password)

35

WLAN ADSL2+ Router

Firmware Update

Go to

Maintenance -> Firmware

to upgrade the firmware. The new firmware for your router

can improve functionality and performance.

Enter the path and name of the upgrade file then click the

UPGRADE

button below. You will be

prompted to confirm the upgrade.

System Log

Go to

Status -> System Log

and you can see the system log file. Click “

Save Log

” to save

system log file.

36

WLAN ADSL2+ Router

System Reset

Go to

Maintenance -> SysRestart

to restart your system.In the event that the router stops

responding correctly or in some way stops functioning, you can perform a reset. Your settings

will not be changed. To perform the reset, select "

Current Setting

" and click on the

"

RESTART

" button below. The router will reboot with current setting. Select "

Factory Default

Setting

" and click on the “

RESTART

” button, the router will reboot with factory default

setting.

ADSL Status

Go to

Status->Device Info

. The 'ADSL Line Status' enables you to check the status of your

ADSL connection including how fast data is being transferred.

37

WLAN ADSL2+ Router

ADSL Statistics

Go to

Status-> Statistics

and select

ADSL

interface. You can see the traffic Statistics of

ADSL interface.

VC Configuration

Go to

Interface Setup -> Internet

. To add or delete ADSL VC configuration, these information

provide by ISP.

38

WLAN ADSL2+ Router

WAN Configuration

Go to

Interface Setup -> Internet

. The router can be connected to your service provider in

any of the following ways.

Dynamic IP Address:

Obtain an IP address automatically from your service provider.

Static IP Address:

Uses a static IP address. Your service provider gives a static IP address to

access Internet services.

PPPoE

: PPP over Ethernet is a common connection method used for xDSL

PPPoA:

PPP over ATM is a common connection method used for xDSL

Bridge:

Bridge mode is a common connection method used for xDSL modem.