Page 41 / 71
Scroll up to view Page 36 - 40
39
WLAN ADSL2+ Router
WAN Status
Go to
Status -> Device Info
and select
the Virtual Circuit
to see the connection status.
Page 42 / 71
40
WLAN ADSL2+ Router
DNS
Go to
Interface -> LAN
to enable DHCP server. Then you can set DNS server for the router. A
Domain Name system (DNS) server is like an index of IP addresses and Web addresses. If
you type a Web address into you browser, a DNS server will find that name in its index and find
the matching IP address.
Most ISPs provide a DNS server for speed and convenience. Since your Service Provider
many connect to the Internet with dynamic IP settings, it is likely that the DNS server IP
addresses are also provided dynamically. However, if there is a DNS server that you would
rather use, you need to specify the IP address below.
Page 43 / 71
41
WLAN ADSL2+ Router
DDNS
Go to
Access Management -> DDNS
to setup your DDNS parameters. Dynamic DNS allows
you to update your dynamic IP address with one or many dynamic DNS services. So anyone
can access your FTP or Web service on your computer using DNS-like address.
LAN Configuration
Go to Interface Setup -> LAN. The 'LAN Settings' option enables you to configure the LAN
port.
If the DHCP Relay is selected, the DHCP requests from local PCs are forward to the DHCP
server runs on WAN side. To have this function working properly, disable the NAT to run on
router mode only, disable the DHCP server on the LAN port, and make sure the routing table
has the correct routing entry.
Page 44 / 71
42
WLAN ADSL2+ Router
Wireless Settings
Go to
Interface -> Wireless
to setup the wireless parameters.
SSID
The identifier for the network. You can change the SSID. Only devices with the same SSID can
interconnect.
Channel
The channel number is used for wireless networking. The channel setting of the wireless
devices within a network should be the same.
Page 45 / 71
43
WLAN ADSL2+ Router
Wireless Security
Go to
Interface -> Wireless
to setup the wireless security.
The Authentication type supports “
WEP 64Bits
”, “
WEP 128Bits
”, “
WPA-PSK
”, “
WPA2-PSK
” ,
“
WPA-PSK/WPA2-PSK
”.