Page 121 / 147
Scroll up to view Page 116 - 120
116
-
Registrar Mode
Step1
Enter the
Wi-Fi Protected Setup (STA)
page of STA. On this page, Select
the
Registrar
mode and set its parameters. You may apply the default
registrar settings. After finishing setting, click the
Submit
button.
Step2
On the
Wi-Fi Protected Setup
(STA) page of STA, enter the AP’s PIN
code (31668569), and then click the
PIN Start
button.
Page 122 / 147
117
Step3
On the
Wi-Fi Protected Setup
page of AP, click the
Apply
button under
WPS Progress
to make AP start to negotiate with STA.
Page 123 / 147
118
Step4
After finish the negotiation process, system displays the
Wi-Fi Protected
Setup
(STA) page as follows:
Page 124 / 147
119
You may check whether WPS connection is successful by viewing the following
pages.
(1)
On the
Station Link Status
page of STA, you can view the current AP status.
See the following figure:
Page 125 / 147
120
(2)
On the
Station List
page of AP, you can view the STA in the
Wireless Network
list.
5.5.9
About
Click
Wireless
>
About
to display the
Station About
page.
19216811.live