Page 101 / 147
Scroll up to view Page 96 - 100
96
On this page, you can modify the parameters of PROF001, such as SSID, network
type and security mode.
°
Activate a Profile
If you want to delete a preset profile (e.g. PR0F001), choose this profile and then click
the
Activate
button. The activated file will be marked with an icon
.See the
following figure:
Page 102 / 147
97
5.5.2
Link Status
Click
Wireless
>
Link Status
to display the
Station Link Status
page.
On this page, you can view the connection status of AP in the STA mode.
5.5.3
Site Survey
Click
Wireless
>
Site Survey
to display the
Station Site Survey
page.
Page 103 / 147
98
On this page, you can view the scanned APs, scan the nearby APs, connect an AP, or
add the connection parameters of an AP to the profile list.
°
Connect an AP
If you want to connect an AP, choose the AP’s SSID, and then click the
Connect
button. If this AP is not encrypted, click the
Apply
button on the following page to
establish connection.
Page 104 / 147
99
If this AP is encrypted, click the
Connect
button, and the following page appears.
On this page, you need to enter the password in the
Pass Phrase
field.
After clicking the
Apply
button, and if this encrypted AP is connected successfully,
the SSID of this AP is marked with a green icon
.
Page 105 / 147
100
°
Scan APs
Click the
Rescan
button on the
Station Site Survey
page, and then you can rescan
the nearby APs. If new APs are detected,
Site Survey
table will be refreshed.
°
Add a Profile
On the
Station Site Survey
page, select an AP in the
Site Survey
table, and then
click the
Add
Profile
button to enter
System Configuration
page. On
System
Configuration
page, click the
Apply
button to add this AP to the profile list.
5.5.4
Statistics
Click
Wireless
>
Statistics
to display the
Station Statistics
page.
19216811.live