Page 81 / 147
Scroll up to view Page 76 - 80
76
On this page, you can modify the WPS settings. WPS can make your client
automatically synchronize with the AP setting, and establish connection.
°
WPS Config
Page 82 / 147
77
WPS
: enable or disable WPS.
After enabling WPS, you can configure the parameters related to WPS.
°
WPS Summary
WPS summary displays the preset WPS information, such as WPS current status,
WPS authentication mode, and WPS encryption type.
Click the
Reset OOB
button on the
Wi-Fi Protected Setup
page, system displays
the WPS default settings. See the following figure:
°
WPS Progress
Page 83 / 147
78
WPS modes include PIN and PBC. For more details, please refer to
WPS
Applications
.
°
WPS Status
The figure above displays WPS current status.
°
WPS Applications
This page provides two WPS modes, including PIN and PBC modes.
At present, WPS supports three types of operation modes, including
Enrollee
mode,
Registrar
mode, and
PBC
mode.
Enrollee
and
Registrar
modes need to apply PIN
negotiation.
-
Enrollee Mode
Step1
Select the enrollee mode on the wireless client, and the software of wireless
client generates a random PIN code, for example, 12345678.
Step2
On the
Wi-Fi Protected Setup
page, enter the PIN code of wireless client,
for example, 12345678.
Step3
Click the
Apply
button on the
Wi-Fi Protected Setup
page to submit the
setting.
Page 84 / 147
79
-
Registrar Mode
Step1
View the AP PIN on the
Wi-Fi Protected Setup
page, for example,
31668729.
Step2
Select
Registrar
mode on the wireless client and enter the PIN code of the
GR-534W. See the following figure:
-
PBC Mode
Step1
On the
Wi-Fi Protected Setup
page, select the
PBC
mode, and then click
the
Apply
button. Or press the
WPS
button on the rear panel.
Page 85 / 147
80
Step2
Enable the PBC function on the wireless client. In that case, GR-534W and
wireless client will automatically establish connection.
5.4.5
Station List
Click
Wireless
>
Station List
to display the
Station List
page.
On this page, you can view the wireless networks that connect to the GR-534W.
If there is any wireless network connects to GR-534W, refresh this page and the
connection information of the wireless network is displayed. See the following figure:
5.4.6
Wireless WDS Setting
The WDS modes of the GR-534W include
Repeater
mode,
Bridge
mode, and
Lazy
mode.
Note:
For better compatibility, please try to adopt the products with the same model to
connect to the GR-534W.
°
WDS Repeater Mode
In the Repeater mode, you can use the GR-534W to connect to the primary router, for
extending the wireless coverage.
19216811.live