Page 76 / 147
Scroll up to view Page 71 - 75
71
Field
Description
Phrase
Key
Renewal
Interval
Set the key renewal interval.
-
WPA2-Enterprise
The parameters of
WPA2-Enterprise
are described as follows:
Field
Description
Security Mode
Select
WPA2-Enterprise
.
WPA Algorithms
You may select
TKIP
,
AES
, or
TKIPAES
.
Key Renewal
Interval
Set the key renewal interval.
PMK Cache
Period
Set the PMK (Pairwise Master Key) cache period.
PMK scheme allows the roaming users that pass
through the 802.11X/EAP handshake protocol roam
Page 77 / 147
72
Field
Description
to the previous AP again. PMK can decrease the
roaming delay and improve the roaming speed.
Pre-Authentication
Enable or disable pre-authentication.
IP Address
The IP address of RADIUS server.
Port
The default port number is 1812. You may change it
according to the server setting.
Shared Secret
The shared key that RADIUS server needs to
authenticate.
Session Timeout
If this value is 0, it indicates that there is no session
time limit.
Idle Timeout
Set the idle timeout.
-
WPA2-PSK
The parameters of
WPA2-PSK
mode are described as follows:
Field
Description
Security
Mode
Select
WPA2-PSK
.
WPA
Algorithms
You may select
TKIP
,
AES
, or
TKIPAES
.
Pass
Phrase
Set 8-bit to 64-bit key.
Key
Renewal
Interval
Set the key renewal interval.
Page 78 / 147
73
-
WPA-PSK/WPA2-PSK
The parameters’ description of
WPA-PSK/WPA2-PSK
mode, please refer to
WPA2-PSK
.
-
WPA1/WPA2-Enterprise
The parameters of
WPA1/WPA2-Enterprise
are described as follows:
Field
Description
Security Mode
Select
WPA1/WPA2-Enterprise
.
WPA Algorithms
You may select
TKIP
,
AES
, or
TKIPAES
.
Key Renewal
Set the key renewal interval.
Page 79 / 147
74
Field
Description
Interval
IP Address
The IP address of RADIUS server.
Port
The default port number is 1812. You may change it
according to the server setting.
Shared Secret
The shared key that RADIUS server needs to
authenticate.
Session Timeout
If this value is 0, it indicates that there is no session
time limit.
Idle Timeout
Set the idle timeout.
-
Dynamic WEP 802.1X
The parameters of
Dynamic WEP 802.1X
mode are described as follows:
Field
Description
Security Mode
Select
Dynamic WEP 802.1X
.
IP Address
The IP address of RADIUS server.
Port
The default port number is 1812. You may change it
according to the server setting.
Shared Secret
The shared key that RADIUS server needs to
authenticate.
Session Timeout
If this value is 0, it indicates that there is no session
time limit.
Page 80 / 147
75
Field
Description
Idle Timeout
Set the idle timeout.
°
Access Policy
The parameters of
Access Policy
are described as follows:
Field
Description
Policy
Disable
: Stop the access control to the wireless devices in
the MAC list.
Allow
: Allow the access control to the wireless devices in
the MAC list.
Reject
: Reject the access control to the wireless devices
in the MAC list.
Add a
station Mac
Enter the MAC address of wireless device that you want to
allow or reject.
After finishing the settings, click the
Apply
button to apply the settings.
5.4.4
WPS
Click
Wireless
>
WPS
to display the
Wi-Fi Protected Setup
page.
19216811.live