Page 116 / 147
Scroll up to view Page 111 - 115
111
Field
Description
WEP Key Type
The key type is Hex or ASCII.
°
Hex: the key length can be 10 bits or 26 bits.
°
ASCII: the key length can be 5 bits or 13 bits.
WEP Key Index
Select the WEP key in the drop down list.
Key
Set the key according to the key type and the key
length.
-
WPA-PSK and WAP2-PSK
When selecting the
WPA-PSK
or
WPA2-PSK
authentication mode, the system
displays the following page:
The parameters of
WPA-PSK
or
WPA2-PSK
authentication mode are described as
follows:
Field
Description
SSID
Set the network name.
Authentication
Select
WPA-PSK
or
WPA2-PSK
.
Encrypt Type
You may select
TKIP
or
AES
.
key
Set 8-bit or 64-bit key.
After finishing setting, click the
Submit
button to apply the settings.
°
The Examples of WPS Settings
The following section describes the application examples of three WPS connection
modes.
Page 117 / 147
112
Preparation:
Prepare two GR-534W s, and set their operation modes.
(1)
One is set to be WISP mode, that is, wireless station mode .This device is called
STA hereinafter. The Pin code is 31669603.
(2)
The other is set to be
Gateway
mode or
Bridge
mode, that is, wireless AP mode.
This device is called AP hereinafter. The PIN code is 31668569.
(3)
Enter the
Station Site Survey
page of STA to view the APs in the
Site Survey
list. Please make sure that the
Sample_AP
is in the list and its signal quality is
excellent.
-
PBC Mode
Step1
Enter the
Wi-Fi Protected Setup
page of AP. On this page, select
PBC
and then click the
Apply
button to make AP start WPS negotiation.
Page 118 / 147
113
Step2
Enter the
Wi-Fi Protected Setup (STA)
page of STA. On this page, click
the
PBC Start
button to make STA start WPS negotiation.
Page 119 / 147
114
Step3
Please pay attention to the WPS status of STA. After finishing negotiating,
system displays the following page.
-
Enrollee Mode
Page 120 / 147
115
Step1
Enter the PIN code of STA (31669603) on the
Wi-Fi Protected Setup
page of AP, and then click the
Apply
button.
Step2
Meanwhile, click the
PIN Start
button on the
Wi-Fi Protected Setup
(STA)
page of STA to make STA start negotiation. After finishing negotiation,
system displays the following page.
19216811.live