Page 136 / 147
Scroll up to view Page 131 - 135
131
The figure above shows the current Website host filters in the system.
°
Add a Host (keyword) Filter
Keyword: Enter the key words of the host that needs to be filtered.
After finishing the settings, click the
Add
button to add a new host filter.
5.7
Administration
The following figure shows the navigation menu of the
Administration
:
The sub-menus of the
Administration
include
Management
,
Upload
,
Settings
,
Status
,
Statistics
and
Log
.
5.7.1
Management
Click
Administration
>
Management
to display the
System Management
page.
Page 137 / 147
132
This page provides administration settings, NTP settings, and DDNS settings.
°
Administrator Settings
The parameters of
Administrator Settings
are described as follows:
Field
Description
Account
Enter the account that you want to change.
Password
Enter the password for the new account.
Note:
Page 138 / 147
133
If you forget the account and the password, please press the
Reset
button. The
system will return to the factory default settings. The default account and the
password are
Admin
.
°
NTP Settings
You may set the AP time to synchronize the time with your PC or the NTP server.
The parameters of the
NTP Settings
are described as follows:
Field
Description
Current Time
Display the current system time. Click the
Sync with Host
button, and then AP can
synchronize its time with your PC.
Time Zone
Select your proper time zone.
NTP Server
Enter the URL of the time server.
NTP synchronization
(hours)
Set the interval for synchronizing with the time
server.
°
DDNS Settings
Page 139 / 147
134
The parameters of
DDNS Settings
are described as follows:
Field
Description
Dynamic DNS Provider
You may select a proper DDNS provider in
the drop down list. The DDNS providers
include Dyndns.org, freedns.afraid.org,
www.zoneedit.com, and www.no-ip.com
Account
Enter the DDNS account.
Password
Enter the DDNS password.
DDNS
Enter the domain name of DDNS.
5.7.2
Upload Firmware
Click
Administration
>
Upload
to display the
Upload Firmware
page.
If you want to upload the firmware, click the
Browse…
button to choose the correct
new firmware, and then click the
Apply
button. System begins to upgrade firmware.
After upgrading firmware, system reboots and automatically enters the Web page.
Note:
Page 140 / 147
135
Upgrading firmware will make the AP return to the factory defaults. In order to avoid
the settings loss, please save the settings before upgrading firmware.
During upgrading, do not cut off the power or press the
Reset
button.
5.7.3
Settings Management
Click
Administration
>
Settings
to display the
Settings Management
page.
The parameters on this page are described as follows:
Field
Description
Export Settings
Click the
Export
button to save the settings to
your local PC.
Import Settings
Click the
Browse…
button to choose the
settings on your PC, and then click the
Import
button to import the settings to AP.
Load Factory Defaults
Click the
Load Default
button, and then
system returns to the factory default settings.
5.7.4
Status
Click
Administration
>
Status
to display the
Access Point Status
page.
19216811.live