Page 161 / 237
Scroll up to view Page 156 - 160
OxyGEN
mini
Office
Administrator’s Guide
System Log
The
System Log
page provides useful information about the operation of your OxyGEN miniOffice.
Figure 13.3: System Log
In case the Syslog service has not been activated, an error message appears notifying that you
should first activate the logging process (see section
Syslog
on page 146).
Figure 13.4: System Log Notification
Gennet s.a.
161
Page 162 / 237
OxyGEN
mini
Office
Administrator’s Guide
Interfaces
Ethernet Switch
This page displays information about the link and speed status of the LAN Ethernet ports. It also displays
the service each port is assigned to (Interface Group), using the icons
,
and
for the Data, Voice
and Video services respectively.
Figure 13.5: Ethernet Port Status
USB Devices
It also shows information about the status of connected USB devices (Storage disks or Printers) on the
USB Host port (optional feature) of the OxyGEN miniOffice.
When an external storage device is connected, the storage link appears. Follow this link in order to
browse through the contents of the external storage device. At the same time, the
icon appears in
the
Action
column. Use this icon to
Disconnect
the device before physically unplugging it.
WARNING
Before unplugging an external storage device from the OxyGEN miniOffice make sure
you first
Disconnect
it using the
icon under the
Devices
category of the
Home
page
or in the
Interfaces
sub-menu of the
Status
configuration menu. Removal of the device
without disconnecting first, may lead to corrupted data on the storage device!
Gennet s.a.
162
Page 163 / 237
OxyGEN
mini
Office
Administrator’s Guide
DSL Line
This page displays basic information about the DSL connection of the OxyGEN miniOffice.
Figure 13.6: DSL Line Information
Available information includes connection status, type of connection, sync rates, signal quality and
error counters. Optionally you can also restart the DSL training process by clicking on the
Retrain
button.
Gennet s.a.
163
Page 164 / 237
OxyGEN
mini
Office
Administrator’s Guide
Wireless
This page displays a list of the connected wireless clients, as well as a list of the wireless access points in
range of the OxyGEN miniOffice (WiFi-enabled devices only).
Figure 13.7: Wireless Network Information
By clicking on the Info icon
next to each client entry, you can see more details about the
corresponding connected wireless client.
Gennet s.a.
164
Page 165 / 237
OxyGEN
mini
Office
Administrator’s Guide
Phone Lines
This page displays information about the active voice calls and the status of basic supplementary services
for all phone lines. It also displays the relevant service activation and deactivation codes.
Figure 13.8: Voice Calls and Services
You can also see the codes for other supported supplementary services, by following the
View Other
Supplementary Service Codes
link, which leads to the following page:
Gennet s.a.
165
19216811.live