Page 151 / 237
Scroll up to view Page 146 - 150
OxyGEN
mini
Office
Administrator’s Guide
Remote Admin
This sub-menu controls remote administration access to the OxyGEN miniOffice. This may help the IT
support staff of your ISP to configure the device remotely.
Figure 12.8: Remote Administration
To enable the remote access:
1. Select the remote access services you wish to activate. The available services for remote access
are:
Secure Shell (SSH)
Web Interface (HTTP)
Secure Web Interface (HTTPS)
2. For each selected access service optionally specify a port different than the well-known one (e.g.
port 8080 instead of 80 for HTTP).
3. Specify
Any
in order to allow incoming connections from any IP address, or restrict remote access
for the selected methods for a single
IP
address.
4. Configure the time interval, during which remote access will be enabled (default 10 min). After
this interval, remote access will be automatically deactivated.
Gennet s.a.
151
Page 152 / 237
OxyGEN
mini
Office
Administrator’s Guide
Note
An
Interval
value equal to 0 will keep remote administration activated until the next
device restart, whereas a value of -1 will keep it permanently active.
Note
By clicking
New Key
, a password-keyword is generated. This keyword acts as a ‘‘seed’’
for the generation of a temprorary local installer account. Further information for this
functionality is available upon request.
5. Click
Apply
.
At any moment, you can see the current remote administration status by clicking on the
Support Info
key.
Gennet s.a.
152
Page 153 / 237
OxyGEN
mini
Office
Administrator’s Guide
Users
This sub-menu allows you to activate or deactivate the restricted user (username
user
) and the read-only
user (username
guest
) profiles of the OxyGEN miniOffice. The former has only access to a pre-configured
subset of the available configuration sub-menus and the latter can only view the current device settings
without authorization to make modifications.
Figure 12.9: Users’ Management
To manage the web interface profiles:
1. Select Enabled or Disabled to change accordingly the status of the corresponding username.
2. Click
Apply
.
Gennet s.a.
153
Page 154 / 237
OxyGEN
mini
Office
Administrator’s Guide
Change Password
This sub-menu lets you change the password for the active administration profile.
Figure 12.10: Change Password
To change the password:
1. Enter the
Current password
.
2. Enter the
New password
.
3. Confirm the password by retyping it in the
Verify
field.
4. Click
Apply
.
Note
After changing the password you will have to restart your web browser and login again
using the new password value.
Gennet s.a.
154
Page 155 / 237
OxyGEN
mini
Office
Administrator’s Guide
Device Restart
This sub-menu lets you reboot the OxyGEN miniOffice. You can reboot it using the following configuration
options:
Current configuration
Factory defaults configuration
Figure 12.11: Device Reboot
To reboot the OxyGEN miniOffice:
1. Optionally select the
Erase Configuration
checkbox in order to erase the current configuration
and restore the factory default one.
2. Click
Restart
.
A message appears displaying the status of the rebooting process:
Figure 12.12: Reboot Status
Gennet s.a.
155
19216811.live