Page 146 / 237
Scroll up to view Page 141 - 145
OxyGEN
mini
Office
Administrator’s Guide
Syslog
Syslog is the logging service providing information about the operation of the OxyGEN miniOffice.
To configure the Syslog service:
1. Select Enabled or Disabled under
Status
to enable or disable the service.
2. Click
Apply
.
Figure 12.3: Syslog Configuration
Using the Web interface of OxyGEN miniOffice, log messages can be viewed in the
System Log
page of the
Status
configuration menu (see page 161).
You can, optionally, also define a remote Syslog server for transmission of the log messages over the
network. To this end check the
Remote logging
checkbox and define the remote server’s
Name
or
IP
address and the protocol
Port
(default syslog port is 514).
Gennet s.a.
146
Page 147 / 237
OxyGEN
mini
Office
Administrator’s Guide
Backup / Restore
This configuration option allows you to save the current configuration of the OxyGEN miniOffice as a
backup on a PC, and optionally restore it at a later time.
Figure 12.4: Configuration Backup/Restore
Backup Configuration
To save the backup configuration file:
1. Click
Backup
.
A message window opens prompting you to save the file:
Figure 12.5: Backup the Configuration
2. Click
Save
.
3. Specify the path where the file is to be saved and click
Save
.
Gennet s.a.
147
Page 148 / 237
OxyGEN
mini
Office
Administrator’s Guide
Restore Configuration
To restore a previously saved configuration:
1. Click
Browse
to specify the path of the saved configuration file.
2. Click
Restore
.
WARNING
The OxyGEN miniOffice will be automatically restarted after the end of the configuration-
restore process.
Gennet s.a.
148
Page 149 / 237
OxyGEN
mini
Office
Administrator’s Guide
Firmware Upgrade
This page allows you to upgrade the OxyGEN miniOffice to the latest firmware version. This can be
performed locally, if you have the new firmware file stored on your PC, or through the Internet, if your ISP
has configured a pre-defined server with the latest firmware version.
Figure 12.6: Local Firmware Upgrade
To locally upgrade the firmware:
1. Click
Browse
to specify the path of the firmware file.
2. Click
Upgrade
.
WARNING
Use only the appropriate firmware file for the exact model of your OxyGEN miniOffice.
If, on the other hand, your ISP has configured a web server with the latest firmware version, the
Automatic Upgrade
heading is visible. Click
Check
in order to query the server for a new firmware
release. If such a new release is available, a notification message will appear.
Click
Download
in order to download the new firmware file and perform the upgrade.
WARNING
The OxyGEN miniOffice will be automatically restarted after the end of the firmware-
upgrade process.
Gennet s.a.
149
Page 150 / 237
OxyGEN
mini
Office
Administrator’s Guide
Figure 12.7: Automatic Firmware Upgrade
Gennet s.a.
150
19216811.live