Page 31 / 120
Scroll up to view Page 26 - 30
30
L2TP WAN Interface Settings
WAN Interface Type:
Select whether the ISP is set to Static IP or Dynamic IP addresses.
Hostname:
This is optional. Only required if specified by ISP
MAC:
The MAC Address that is used to connect to the ISP.
L2TP Settings
Login:
Username assigned to you by the ISP
Password:
Password for this username.
Service IP Address:
The IP Address of the PPTP server.
MTU:
The maximum size of packets.
Do not change unless mentioned by the ISP.
Page 32 / 120
31
d)
Setup the level of wireless security to be used.
EnGenius recommends the
Highest
level of security to be used.
Note:
802.11n wireless speeds may not be achievable if the security is setup to Lowest and Low level.
SSID:
Enter the name of your wireless network.
Key:
Enter the security key for your wireless network.
Page 33 / 120
32
e)
Check the settings are correct, and then click
Reboot
to apply the settings.
Page 34 / 120
33
8.1.2
AP Mode
a)
Select the level of wireless security to be used.
EnGenius recommends the
Highest
level of security to be used.
Note:
802.11n wireless speeds may not be achievable if the security is setup to Lowest and Low level.
SSID:
Enter the name of your wireless network.
Key:
Enter the security key for your wireless network.
Page 35 / 120
34
b)
Check the settings are correct, and then click
Reboot
to apply the settings.
19216811.live