Page 21 / 120
Scroll up to view Page 16 - 20
Page 22 / 120
21
5.
Select the Operation Mode.
Please ensure you have the proper cables connected as described in the Hardware Installation section.
Page 23 / 120
22
8.1.1
AP Router Mode
a)
The device will now automatically search
for the correct Internet settings.
b)
The most appropriate WAN type will be
determined and selected automatically.
If it is incorrect, please select
Others
to set up the WAN settings manually.
Page 24 / 120
23
c)
There are many WAN service types available.
Please obtain the correct settings from your
Internet Service Provider (ISP).
Static IP Address
If your ISP Provider has assigned you a fixed IP address,
enter the assigned IP address, Subnet mask, Default
Gateway IP address, and Primary DNS and Secondary
DNS (if available) of your ISP provider.
Page 25 / 120
24
Dynamic IP Address
The IP Address is allocated automatically. However some ISP’s will also recognize the MAC address and will reject connections
if the
MAC address does not match.
If your ISP has recorded the MAC address of your computer’s Ethernet LAN card, please connect only the computer with the auth
orized
MAC address, and click the
Clone MAC Address
button.
This will replace the AP Router MAC address to the computer MAC address. The correct MAC address is used to initiate the connection
to the ISP.
Dynamic IP Address
Hostname:
This is optional. Only required if specified by ISP
MAC:
The MAC Address that is used to connect to the ISP.
19216811.live