Page 51 / 120
Scroll up to view Page 46 - 50
50
Monitor
This page shows a histogram of the WAN and Wireless LAN traffic.
The information is automatically updated every five seconds.
Page 52 / 120
51
Language
This page allows you to change the Language of the User Interface.
Page 53 / 120
52
8.2.2
Internet
The Internet section allows you to manually set the WAN type connection and its related settings.
Status
This page shows the current status of the device’s WAN connection.
Page 54 / 120
53
Dynamic IP Address
The
IP Address is allocated automatically. However some ISP’s will also recognize the MAC address and will reject connections if
the
MAC address does not match.
If your ISP has recorded the MAC address of your computer’s Ethernet LAN card, please connect only
the computer with the
authorized MAC address, and click the
Clone MAC Address
button.
This will replace the AP Router MAC address to the computer MAC address. The correct MAC address is used to initiate the connection to the ISP.
Page 55 / 120
54
Dynamic IP Address
Hostname:
This is optional. Only required if specified by ISP
MAC address:
The MAC Address that is used to connect to the ISP.
DNS Servers
Two DNS servers can be assigned for use by your LAN devices.
There are two modes available.
From ISP:
LAN devices are assigned the DNS server IP address of your ISP.
User-Defined:
Set the DNS server IP address manually.
Static IP Address
If your ISP Provider has assigned you a fixed IP address, enter the assigned IP address, Subnet mask, Default Gateway IP address, and Primary
DNS and Secondary DNS (if available) of your ISP provider.
19216811.live