Page 36 / 97
Scroll up to view Page 31 - 35
±
WIZARD
Click
Wizard
to configure the basic functionalities of the ENHWI-N3 Router. A popup
Setup Wizard Window will be immediately displayed. If the popup window for Setup
Wizard failed to appear check your Popup Settings and make sure popup is allowed
at least temporarily for this purpose. Before you continue, check all the needed
cables if they are properly hooked up. Check your DSL or Cable Modem if working
properly and is connected to your ISP and then click
<Next>.
Refer to the
Smart
Wizard
section for more details
.
±
INTERNET
-
Status
This page shows the current Internet connection type and status
36
Page 37 / 97
-
Dynamic IP
Use the MAC address when registering for the Internet service, and do not change
it unless required by your ISP. If your ISP use the MAC address of the Ethernet
card as an identifier, connect only the PC with the registered MAC address to the
broadband router and click the
<Clone MAC Address>
button. This will replace
the current MAC address with the already registered Ethernet card MAC address
.
37
Page 38 / 97
Host Name:
This is optional.
MAC address:
The default value is set to the WAN’s physical address or MAC of
the broadband router.
- Static IP
If your ISP Provider has assigned a fixed public IP address for you to use, enter the
assigned IP address, Subnet Mask, Default Gateway IP address, Primary and
Secondary DNS (if available) of your ISP provider.
38
Page 39 / 97
- Point-to-Point Protocol over Ethernet(PPPoE)
39
Page 40 / 97
Login / Password:
Enter the PPPoE username and password assigned by your
ISP Provider.
Service Name:
This is optional.
Maximum Transmission Unit (MTU):
This is the maximum size of the packets.
Type:
Keep Connection
- will stay connected to the Internet
Automatic Connection -
automatically connects to the Internet when
an application needs it, and drops the connection after the designated
idle time period.
Manual Connection
– manually connect and disconnect to the internet
by the user
Idle Timeout (available only under Automatic Connection):
This is a
maximum period of time for which the Internet connection is maintained
during inactivity. If the application is inactive for certain time designated
here the internet connection will be automatically dropped.
- Point-to-Point Tunneling Protocol (PPTP)
40
19216811.live