Page 16 / 97
Scroll up to view Page 11 - 15
Make sure your
DSL/CABLE modem
is setup and working prior to this installation
procedures. If not, call your Internet Service Provider and have them check and help
you in setting up your DSL/Cable modem.
Click
to proceed.
16
Page 17 / 97
Check the MODEM and ENHWI-N3 connection. It should be as shown below.
17
Page 18 / 97
Check power connection for modem as well as ENHWI-N3.
Make sure the antenna is connected to rear panel of ENHWI-N3.
Click
<Next>
to proceed.
Notice the LED will light up at this stage. If not, check your procedures again.
18
Page 19 / 97
Click
to configure WAN & Wireless settings.
19
Page 20 / 97
Enter the factory default username is
admin
and password is also
admin.
Click
to continue. Your default browser screen will connect to the ENHWI-N3 User
Click
to enter the mode selection screen.
20
19216811.live