Page 31 / 97
Scroll up to view Page 26 - 30
DHCP Server
DHCP Server:
This can be enabled or disabled, “Enabled” by default.
Lease time:
Lease time assigned to all IP address by the DHCP server.
Start IP:
This is the first IP address in the IP pool range in which are being
assigned and leased to DHCP clients.
End IP:
This is the end of the IP address pool range
Domain Name:
The Domain Name for the existing or customized network.
z
DHCP Tab
This is where to view the current LAN clients that have assigned or leased IP
address by the DHCP server.
This screen also shows all the DHCP clients that are
currently connected to your network. The table shows the assigned or leased IP
address, MAC address and the lease expiration data for each DHCP clients. Use
31
Page 32 / 97
the
<Refresh>
button to update the available information. Click the
<Refresh>
button to get the updated table.
You can click to put a check mark on “
Enable Static DHCP IP
“. It is possible to
add more static DHCP IP addresses. They are listed in the table “
Current Static
DHCP Table
“. IP address can be deleted if wanted to.
Click the
<Apply>
button to save the changes made to the configuration.
z
Schedule Tab
This page allows users to set up a scheduled function for the Firewall and Power
Saving features of the ENHWI-N3 router.
.
Edit the scheduled function to allow configuration for firewall or power savings
services. Fill in the schedule and select type of service you desired. Click <
Apply
>
to
save
the
32
Page 33 / 97
settings.
The “Schedule” table screen lists the pre-scheduled services. Select any of the
schedules by using the check box located on the right side of each line to edit or
Delete selected schedule line.
z
Event Log Tab
33
Page 34 / 97
On this “Event Log” screen, it displays all events and events information occurred
after the start-up. Scroll down to see more. The Event Log can be saved to the
local file-storage device such as hard disc drive by using the
<Save>
button, or
the Event Log can be emptied using the
<Clear>
button. Use the
<Refresh>
button to reset the Event Log and to get the most updated information. When the
router is powered OFF, the Event Log will be wiped out and will come up empty.
The saved logs can be uploaded and viewed again.
z
Monitor Tab
This screen shows the histogram of the network connection on WAN, LAN &
WLAN. Auto refresh keeps information updated frequently.
34
Page 35 / 97
z
Language Tab
This is where you select preferred language.
35
19216811.live