Page 86 / 97
Scroll up to view Page 81 - 85
802.1d Spanning Tree:
This is disabled by default. If 802.1d Spanning Tree
function is enabled, this router will use the spanning
tree protocol to prevent network loops.
86
Page 87 / 97
-
Event Log
View operations log of the
ENHWI-N3
. This page shows the current system log
of the ENHWI-N3 router. It displays any event occurred after system start up.
Use the scroll bar to go down to the bottom of the page, the system log can be
saved
<Save>
to a local file for future use or the system log can be cleared
<Clear>
or it can be refreshed
<Refresh>
to get the most updated information.
When the system is powered down, the system log will disappear if not saved to
a local file.
-
Monitor
The Monitor Tab shows the bandwidth monitoring feature of each network
interface of the ENHWI-N3 router, wireless or wired and of the network packet
histogram for the network connection on WLAN. Auto refresh keeps information
updated frequently.
87
Page 88 / 97
-
Language
This Wireless Router supports multiple languages for user interface. Select your
preferred language.
±
Wireless
-
Basic
You can set parameters use by the wireless stations to connect to this router. The
parameter includes Mode, ESSID, Channel Number and Associated Client.
88
Page 89 / 97
Radio:
Enable or Disable Wireless function
Band:
Allows you to set the frequency band of the router. Fix at 802.11b,
802.11g or 802.11n modes. You can also select B+G mode to allow
802.11b and 802.11g clients at the same time.
Enable ESSID:
You can specify the maximum ESSID number.
ESSID1~3:
Allow you to specify ESSID of WLAN.
Site Survey:
Click this button to scan the available wireless routers that can be
set as this router’s parent router. By doing so this ENHWI-N3 router will
become a wireless extender / repeater of the selected parent router. Select
one router from the list for that router to become this router’s parent router.
89
Page 90 / 97
-
Client List
This WLAN Client Table shows the Wireless client associated to this Wireless
Router.
-
Policy
The Broadband router allows you to set up the Wireless Access Policy. If multiple
SSID is created, this is the place to set the policy for each SSID.
Communication between Wireless clients:
This function is to allow other Wireless Client to communicate with another Wireless
Client on the LAN connected on the same SSID.
90
19216811.live