Page 81 / 97
Scroll up to view Page 76 - 80
-
Diagnosis
In this page lets you run diagnosis to your network status.
-
Firmware
This page allows you to upgrade the router’s firmware. To upgrade the firmware
of your Broadband router, you need to download the firmware file to your local
hard disk, and enter that file name and path in the appropriate field on this page.
You can also use the Browse button to find the firmware file in your PC.
81
Page 82 / 97
Once you’ve selected the new firmware file, click <
Apply
> at the bottom of the
screen to start the upgrade process
-
Back-up
This page allows you to save the current router configurations. When you save the
configurations, you also can restore the saved configurations into the router through
the
Restore Settings
. If extreme problems occur you can use the
Restore to
Factory Defaults
to set all configurations to its original default settings. Warning:
You will loose any saved data and settings when you set back to the manufacturer’s
default settings, but you can re-enter your previous settings manually.
82
Page 83 / 97
Backup Settings:
This can save the current Broadband router configuration to a file
named "
config.bin
" on your PC. You can also use the
<Upload>
button to restore
the saved configuration to the Broadband router. Alternatively, you can use the
"
Restore to Factory Defaults
" tool to force the Broadband router to perform a
power reset and restore the original factory settings.
-
Reset
You can reset the broadband router when system stops responding correctly or stop
functions.
83
Page 84 / 97
XIII -
Repeater Mode
Repeater mode has limited settings compared to the AP mode. Choose “Repeater
mode” on the top right corner of the configuration page.
You will see the configuration homepage under “
REPEATER
” mode now.
±
System
-
Status
System status section allows you to monitor the current status of your router.
You can see the Uptime, hardware information, serial number as well as firmware
version information.
84
Page 85 / 97
LAN Settings:
This page displays the Broadband router LAN port’s current LAN
information.
WLAN
Settings:
Wireless
configuration
details
such
as
SSID,
Status(Connected/Disconnected), Security and Channel are briefly shown.
-
LAN
The LAN Tabs shows LAN settings. LAN settings can be change as needed. If you
are an entry level user, try opening a website from your computer. If you’re
successful and able to connect and browse the web site you opened without any
problem, do not change any of the settings.
Click
<Apply>
at the bottom of this screen to save the changed configurations.
IP address:
This is the router’s LAN IP address (Your LAN clients default gateway
IP address). It can be changed based on your network architecture.
IP Subnet Mask:
Specify a Subnet Mask IP address for your LAN segment.
85
19216811.live