Page 71 / 97
Scroll up to view Page 66 - 70
-
UPNP
With UPnP, all PCs in you Intranet will discover this router automatically. So, you
don’t have to configure your PC and it can easily access the Internet through this
router.
71
Page 72 / 97
Enable / Disable UPnP:
You can enable or Disable the UPnP feature here.
After you enabled the UPnP feature, all client systems
that support UPnP, like Windows XP, can discover this
router automatically and access the Internet through this
router without having to configure anything. The NAT
Traversal
function
provided
by
UPnP
can
let
applications that support UPnP connect to the internet
without having to configure the virtual server sections.
- Quality of Service (QoS)
QoS can let you classify Internet application traffic by source/destination IP
address and port number. You can assign priority for each type of application
and reserve bandwidth for it. The packets of applications with higher priority will
always go first. Lower priority applications will get bandwidth after higher priority
applications get enough bandwidth. This can let you have a better experience in
using critical real time services like Internet phone, video conference …etc. All
the applications not specified by you are classified as rule “Others”.
Priority Queue
This can put the packets of specific protocols in High/Low Queue. The packets in
High Queue will process first.
72
Page 73 / 97
Unlimited Priority Queue:
The LAN IP address will not be bounded in the QoS
limitation.
High/Low Priority Queue:
This can put the packets in the protocol and port
range to High/Low QoS Queue.
Bandwidth Allocation:
This can reserve / limit the throughput of specific protocols and port range. You
can set the upper bound and Lower bound.
73
Page 74 / 97
Type:
Specify the direction of packets. Upload / Download or both.
IP range:
Specify the IP address range. You could also fill one IP address
Protocol:
Specify the packet type. The default ALL will put all packets in the QoS
priority Queue.
Port range:
Specify the Port range. You could also fill one Port.
Policy:
Specify the policy of QoS,
Min
option will reserve the selected data rate
in QoS queue.
Max
option will limit the selected data rate in QoS queue.
Rate:
The data rate of QoS queue.
Disabled:
This turn off QoS Service.
74
Page 75 / 97
-
Routing
You can set Enable Static Routing to let the router forward packets using your routing
policy.
Destination LAN IP:
Specify the destination LAN IP address of static routing rule.
75
19216811.live