Page 76 / 97
Scroll up to view Page 71 - 75
Subnet Mask:
Specify the Subnet Mask of static routing rule.
Default Gateway:
Specify the default gateway of static routing rule.
Hops:
Specify the Max Hops number of static routing rule.
Interface:
Specify the Interface of static routing rule.
±
TOOLS
-
Admin
You can change the password required to log into the broadband router's system
web-based management. By default, the password is: admin. Passwords can
contain 0 to 12 alphanumeric characters, and are case sensitive.
Old Password:
Fill in the current password to allow changing to a new
password.
New Password:
Enter your new password and type it again in
Repeat New
Password
for verification purposes
76
Page 77 / 97
Remote managemen
t
Allows you to designate a host in the Internet. The ability to configure the
Broadband router from a remote site. Enter the designated host IP Address
in the Host IP Address field.
Host Address:
This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from
a remote site. If the Host Address is left 0.0.0.0 this means
anyone can access the router’s web-based configuration from a
remote location, providing they know the password.
Port:
The port number of the remote management web interface.
Enabled:
Check to enable the remote management function.
Click <
Apply
> at the bottom of the screen to save the above configurations.
- Time
The Time Zone allows your router to refer or base its time on the settings
configured here, which will affect functions such as Log entries and Firewall
settings.
Setting Up Time:
Synchronize with the NTP server
77
Page 78 / 97
Time Zone:
Select the time zone of the country you are currently located. The
router will set its time based on your selection.
NTP Time Server:
The router can be set up to use external NTP Time Server.
Daylight Savings:
The router can also be set to automatically adjust to the
Daylight Savings changes. If you wish to use this function,
you must select the Daylight Savings Time period and put a
checkmark on the Enable box to enable your daylight
savings time configuration.
Click
<Apply>
at the bottom of the screen to save the above configurations.
Synchronize with your PC
You could synchronize timer with your computers time.
78
Page 79 / 97
PC Date and Time:
This field would display your computer’s date and time.
Daylight Savings:
The router can also take Daylight Savings into account. If you
wish to use this function, you must select the Daylight
Savings Time period and check/tick the enable box to enable
your daylight saving configuration.
Click
<Apply>
at the bottom of the screen to save the above configurations.
-
DDNS
DDNS allows you to map the static domain name to a dynamic IP address. You
must register to a DDNS services and to get an account, password and your
static domain name from the DDNS service providers. This router supports
DynDNS, TZO and other common DDNS service providers.
79
Page 80 / 97
Enable/Disable DDNS:
Enable or disable the DDNS function of this router
Server Address:
Select a DDNS service provider
Host
Name:
Fill in your static domain name that uses DDNS.
Username:
The account that your DDNS service provider assigned to you.
Password:
The password you set for the DDNS service account above.
Click
<Apply>
at the bottom of the screen to save the above configurations.
-
Power
Saving power in WLAN mode can be enabled / disabled in this page.
80
19216811.live