EDIMAX BR-6504n Router Manual PDF (Setup & Configuration Guide)

Page 111 / 131 Scroll up to view Page 106 - 110

110

traffic out.

Advanced

Click this button and you can set advanced

Settings :

settings of the DoS prevention method listed above,

please see section 3-3-3-1 ‘DoS – Advanced Settings’

below.

After you finish with all settings, please click ‘Apply’

button, and the

following message will be displayed on your web browser:

Please click ‘Continue’ to back to previous setup menu; to continue on other

setup procedures, or click ‘Apply’ to reboot the router so the settings will

take effect (Please wait for about 50 seconds while router is rebooting).

If you want to reset all settings in this page back to previously-saved value,

please click ‘Cancel’ button.

Page 112 / 131

111

3-3-3-1 DoS - Advanced Settings

When you click ‘Advanced’ button in DoS menu, the following message will

be displayed on your web browser:

Here are descriptions of every setup items:

Ping of Death :

Set the threshold of when this DoS prevention

mechanism will be activated. Please check the box of

Ping of Death, and input the frequency of threshold

(how many packets per second, minute, or hour), you

can also input the ‘Burst’ value, which means when this

number of ‘Ping of Death’ packet is received in very

short time, this DoS prevention mechanism will be

activated.

Discard Ping

Check the box to activate this DoS

From WAN:

prevention mechanism.

Port Scan :

Many kind of port scan methods are listed here, please

check one or more DoS attack methods you want to

prevent.

Sync Flood :

Like Ping of Death, you can set the threshold of when

this DoS prevention mechanism will be activated.

Page 113 / 131

112

After you finish with all settings, please click ‘Apply’

button, and the

following message will be displayed on your web browser:

Please click ‘Continue’ to back to previous setup menu; to continue on other

setup procedures, or click ‘Apply’ to reboot the router so the settings will

take effect (Please wait for about 50 seconds while router is rebooting).

If you want to reset all settings in this page back to previously-saved value,

please click ‘Cancel’ button.

3-3-4 Demilitarized Zone (DMZ)

Demilitarized Zone (DMZ) refers to a special area in your local network.

This area resides in local network, and all computers in this area uses private

IP address, too. But these private IP addresses are mapped to a certain

Internet IP address, so other people on Internet can fully access those

computers in DMZ.

Please follow the following instructions to set DMZ parameters:

Please click ‘Firewall’ menu on the left of web management interface, then

click ‘DMZ’, and the following message will be displayed on your web

browser:

Page 114 / 131

113

Here are descriptions of every setup items:

Enable DMZ :

Check this box to enable DMZ function, uncheck this

box to disable DMZ function.

Public IP

You can select ‘Dynamic IP’ or ‘Static IP’ here.

address :

If you select ‘Dynamic IP’, you have to select an

Internet connection session from dropdown menu; if

you select ‘Static IP’, please input the IP address that

you want to map to a specific private IP address.

Client PC IP

Please input the private IP address that the

address :

Internet IP address will be mapped to.

Add :

Click ‘Add’ button to add the public IP address and

associated private IP address to the DMZ table.

Reset :

Click ‘Clear’ to remove the value you inputted in Public

IP address and Client PC IP address field.

Current

All existing public IP address and private IP

DMZ table :

address mapping will be displayed here.

Delete

If you want to delete a specific DMZ entry, check

Selected :

the ‘select’ box of the DMZ entry you want to delete,

then click ‘Delete Selected’ button. (You can select more

4

Page 115 / 131

114

than one DMZ entries).

Delete All :

If you want to delete all DMZ entries listed here, please

click ‘Delete All’ button.

Reset :

You can also click ‘Reset’ button to unselect all DMZ

entries.

After you finish with all settings, please click ‘Apply’

button, and the

following message will be displayed on your web browser:

Please click ‘Continue’ to back to previous setup menu; to continue on other

setup procedures, or click ‘Apply’ to reboot the router so the settings will

take effect (Please wait for about 50 seconds while router is rebooting).

If you want to reset all settings in this page back to previously-saved value,

please click ‘Cancel’ button.

3-4 System Status

The functions described here will provide you with system related

information. To enter system status menu, please either click ‘Status’ link

located at the upper-right corner of web management interface, or click

‘Status’ button in main menu.

Rate

Popular EDIMAX Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share