106
address in the left field to define a single IP address.
Client PC
Please check all services you want to allow or
Service :
deny this IP address to use, you can check multiple
services.
Protocol:
If the service you need is not listed above, you can
create a new service on your own. Please select TCP or
UDP, if you’re not sure, please select ‘Both’.
Port Range :
Please input the port range of new service here. If you
want to specify port 80 to 90, please input ’80-90’; if
you want to apply this rule on a single port, just input
the port number, like ‘80’.
Add:
When you finish with all settings, please click ‘Add’ to
save settings, you’ll be brought back to previous menu,
and the rule you just set will appear in current IP
filtering table.
If you want to remove all settings in this page, click ‘Reset’ button.
3-3-2 URL Blocking
If you want to prevent computers in local network from accessing certain
website (like pornography, violence, or anything you want to block), you can
use this function to stop computers in local network from accessing the site
you defined here.
This function is useful for parents and company managers.
Please follow the following instructions to set URL blocking parameters:
Please click ‘Firewall’ menu on the left of web management interface, then
click ‘URL Blocking’, and the following message will be displayed on your
web browser: