EDIMAX BR-6504n Router Manual PDF (Setup & Configuration Guide)

Page 101 / 131 Scroll up to view Page 96 - 100

100

Please click ‘NAT’ menu on the left of web management interface, then click

‘ALG Settings’, and the following message will be displayed on your web

browser:

There are many applications listed here. Please check the box of the special

support for applications you need, and then click ‘Apply’ button, and the

following message will be displayed on your web browser:

Please click ‘Continue’ to back to previous setup menu; to continue on other

setup procedures, or click ‘Apply’ to reboot the router so the settings will

take effect (Please wait for about 50 seconds while router is rebooting).

If you want to reset all settings in this page back to previously-saved value,

please click ‘Cancel’ button.

Page 102 / 131

101

3-3

Firewall

Excepting NAT, this router also provides firewall function to block malicious

intruders from accessing your computers on local network. These functions

include inbound attack prevention, and block outbound traffics, like block

URLs which have pre-defined keywords.

Please follow the following instructions to enable or disable firewall

function:

Please click ‘Firewall’ menu on the left of web management interface, and

the following message will be displayed on your web browser:

Please select ‘Enable’ or ‘Disable’ to enable or disable firewall function of

this router, the click ‘Apply’ button, and the following message will be

displayed on your web browser:

Please click ‘Continue’ to back to previous setup menu; to continue on other

setup procedures, or click ‘Apply’ to reboot the router so the settings will

take effect (Please wait for about 50 seconds while router is rebooting).

Page 103 / 131

102

3-3-1 Access Control

This function allows or denies computers with specific MAC address from

connecting to the network; it can also allow or deny computers with specific

IP address, protocol, or port.

Please click ‘Firewall’ menu on the left of web management interface, then

click ‘Access Control’, and the following message will be displayed on your

web browser:

Here are descriptions of every setup items:

Enable MAC

Check this box to enable MAC address based

Filtering :

filtering, and please select ‘Deny’ or ‘Allow’ to decide

the behavior of MAC filtering table. If you select deny,

all MAC addresses listed in filtering table will be

denied from connecting to the network; if you select

allow, only MAC addresses listed in filtering table will

be able to connect to the network, and rejecting all

other network devices.

Client PC

Please input the MAC address of computer

MAC address :

or network device here, dash ( - ) or colon ( : ) are not

1

4

5

7

12

10

Page 104 / 131

103

required. (i.e. If the MAC address label of your wireless

device indicates ‘aa-bb-cc-dd-ee-ff’ or

‘aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’

Comment :

You can input any text here as the comment of this MAC

address, like ‘ROOM 2A Computer’ or anything. You

can input up to 16 alphanumerical characters here.

This is optional and you can leave it blank, however, it’s

recommended to use this field to write a comment for

every MAC addresses as a memory aid.

Add :

Click ‘Add’ button to add the MAC address and

associated comment to the MAC address filtering table.

Reset :

Remove all inputted values.

MAC Filtering

All existing MAC addresses in filtering table

Table :

will be listed here.

Delete Selected :

If you want to delete a specific MAC address entry,

check the ‘select’ box of the MAC address you want to

delete, then click ‘Delete Selected’ button. (You can

select more than one MAC addresses).

Delete All :

If you want to delete all MAC addresses listed here,

please click ‘Delete All’ button.

Reset :

You can also click ‘Reset’ button to unselect all MAC

addresses.

Enable IP

Check this box to enable IP address based

Filtering Table : filtering, and please select ‘Deny’ or ‘Allow’

to decide the behavior of IP filtering table. If you select

deny, all IP addresses listed in filtering table will be

denied from connecting to the network; if you select

allow, only IP addresses listed in filtering table will be

able to connect to the network, and rejecting all other

network devices.

Page 105 / 131

104

IP Filtering

All existing IP addresses in filtering table will be

Table :

listed here.

Add PC :

Click this button to add a new IP address to IP filtering

table, up to 20 IP addresses can be added.

Please refer to section 3-3-1-1 ‘Add PC’ below.

Delete

If you want to delete a specific IP address entry,

Selected :

check the ‘select’ box of the IP address you want to

delete, then click ‘Delete Selected’ button. (You can

select more than one IP addresses).

Delete All :

If you want to delete all IP addresses listed here, please

click ‘Delete All’ button.

After you finish with all settings, please click ‘Apply’

button, and the

following message will be displayed on your web browser:

Please click ‘Continue’ to back to previous setup menu; to continue on other

setup procedures, or click ‘Apply’ to reboot the router so the settings will

take effect (Please wait for about 50 seconds while router is rebooting).

If you want to reset all settings in this page back to previously-saved value,

please click ‘Cancel’ button.

Rate

Popular EDIMAX Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share