3

‐

1

‐

1 Time Zone

You can change the time zone settings of this broadband router. It’s important to have

correct date and time setting if you need to read system log and use build

‐

in firewall

functions.

The descriptions of every setting item are listed as follow:

Item Name

Description

Time Zone

Please select a time zone of the country or

region of your residence here. If you can’t find

the country / region of your residence here,

please select a city / region which time zone is

the same with the country / region of your

residence.

Time Server Address

This load-balance router supports NTP

(Network Time Protocol). NTP server will

provide correct time for this router to setup the

date and time of the router automatically.

Please input the host name or IP address of

NTP server here. If you don’t know the host

name or IP address of time server, please ask

network administrator or use ‘pool.ntp.org’ as

time server.

Daylight Savings

If the country / region of your residence use

daylight saving time, please check ‘Enable

Function’ box, and select the beginning and

ending date of daylight time saving.

3

‐

1

‐

2 Password Settings

You can change the web login password of this broadband router. If you keep using the

default password ‘1234’, other people may access the configuration interface without your

permission. Please change the password as soon as possible.

The descriptions of every setting item are listed as follow:

Item Name

Description

Current Password

Please input current password here.

New Password

Please input new password here.

Confirmed Password

Please input new password here again for

confirmation.

After you inputted current and new password, click ‘Apply’ to save changes, or you can click

‘Cancel’ to keep current password untouched. Please note that you’ll be asked for

username and password for login again if you changed password.

3

‐

1

‐

3 Remote Management

If you need to manage this broadband router outside of your LAN (i.e. from Internet), you

can use this function to assign a remote IP address which is permitted to connect to this

broadband router’s web management interface from Internet.

If it’s not required for you to manage this broadband router from Internet, you can disable

this function to improve security.

The descriptions of every setting item are listed as follow:

Item Name

Description

Host address

Input the IP address of the remote host you

wish to initiate a management access.

Port

You can define the port number this router

should expect an incoming connection request.

If you’re providing a web service (default port

number is 80), you should try to use other port

number. You can use the default port setting

‘8080’, or something like ‘32245’ or ‘1429’.

(Any integer between 1 and 65534)

Enabled

Check this box to enable remote management

function. When this box is unchecked, no one

can access this broadband router’s

management interface from Internet.

Please click ‘Apply’ to save changes in this page, or you can click ‘Cancel’ to discard all

settings in this page. After you click ‘Apply’ button, you’ll see the following message:

Please click ‘Apply’ to save changes you made and restart the broadband router, this

requires about 30 seconds and the broadband router will stop responding (this is normal

and is not malfunction). You can reconnect to this broadband router and continue on other

settings later.

To setup other items now and restart broadband router later, click ‘Continue’.