Page 71 / 190
Scroll up to view Page 66 - 70
Connection Type
Please select the connection type of Internet
connection you wish to use. There are 3
options:
‘Continuous’ - keep internet connection alive,
do not disconnect.
’Connect on Demand’ - only connects to
Internet when there’s a connect attempt,
Manual - only connects to Internet when
‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is
pressed.
Idle Time Out
Please specify the time to shutdown internet
connect after no internet activity is detected in
minute(s). This option is only available when
connection type is ‘Connect on Demand’.
Page 72 / 190
If you wish to select another connection type as broadband connection type, click ‘Back’; or
you can click ‘OK’ to finish with quick setup. You’ll see the following message:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.
Page 73 / 190
3
‐
2
‐
5 L2TP
If your ISP requires you to use L2TP (Layer
‐
2 Tunneling Protocol) to establish connection,
you can select this connection type to establish Internet connection. L2TP is another
popular connection method for xDSL and other Internet connection types, and all required
setting items are the same with PPTP connection.
Like PPTP, there are two kinds of required setting, we’ll start from ‘WAN Interface Settings’:
Please select the type of how you obtain IP address from your service provider here. You
can choose ‘Obtain an IP address automatically’ (equal to DHCP, please refer to ‘Dynamic IP’
section above), or ‘Use the following IP address’ (equal to static IP address, please refer to
‘PPPoE’ section above).
WAN interface settings must be correctly set, or the Internet connection will fail even those
settings of L2TP settings are correct. Please contact your Internet service provider if you
don’t know what you should fill in these fields.
Now please go to L2TP settings section:
Page 74 / 190
Here are descriptions of every setup item:
Item Name
Description
User ID
Please input user ID (user name) assigned by
your Internet service provider here.
Password
Please input the password assigned by your
Internet service provider here.
L2TP Gateway
Please input the IP address of PPTP gateway
assigned by your Internet service provider
here.
MTU
Please input the MTU value of your network
connection here. If you don’t know, you can
use default value.
Connection Type
Please select the connection type of Internet
connection you wish to use. There are 3
options:
‘Continuous’
‐
keep internet connection alive,
do not disconnect.
’Connect on Demand’
‐
only connects to
Internet when there’s a connect attempt,
Page 75 / 190
Manual
‐
only connects to Internet when
‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is
pressed.
Idle Time Out
Please specify the time to shutdown internet
connect after no internet activity is detected in
minute(s). This option is only available when
connection type is ‘Connect on Demand’.
19216811.live