Page 66 / 190
Scroll up to view Page 61 - 65
If you wish to select another connection type as broadband connection type, click ‘Back’; or
you can click ‘OK’ to finish with quick setup. You’ll see the following message:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.
Page 67 / 190
3
‐
2
‐
3 PPPoE
If your ISP requires you to establish Internet connection by PPPoE (Point
‐
to
‐
Point Protocol
over Ethernet), you can use this connection type to establish Internet connection.
Here are descriptions of every setup item:
Item Name
Description
User Name
Please input user name assigned by your
Internet service provider here.
Password
Please input the password assigned by your
Internet service provider here.
Service Name
Please give a name to this Internet service, this
is optional.
MTU
Please input the MTU value of your network
connection here. If you don’t know, you can
use default value.
Connection Type
Please select the connection type of Internet
connection you wish to use. There are 3
options:
Page 68 / 190
‘Continuous’ - keep internet connection alive,
do not disconnect.
’Connect on Demand’ - only connects to
Internet when there’s a connect attempt,
Manual - only connects to Internet when
‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is
pressed.
Idle Time Out
Please specify the time to shutdown internet
connect after no internet activity is detected in
minute(s). This option is only available when
connection type is ‘Connect on Demand’.
If you wish to select another connection type as broadband connection type, click ‘Back’; or
you can click ‘OK’ to finish with quick setup. You’ll see the following message:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.
Page 69 / 190
3
‐
2
‐
4 PPTP
If your ISP requires you to use PPTP (Point
‐
to
‐
Point Tunneling Protocol) to establish
connection, you can select this connection type to establish Internet connection.
PPTP requires two kinds of setting: WAN interface setting (setup IP address) and PPTP
setting (PPTP user name and password). Here we start from WAN interface setting first:
Select the type of how you obtain IP address from your service provider here. You can
choose ‘Obtain an IP address automatically’ (equal to DHCP, please refer to ‘Cable Modem’
section above), or ‘Use the following IP address’ (i.e. static IP address).
WAN interface settings must be correctly set, or the Internet connection will fail even those
settings of PPTP settings are correct. Please contact your Internet service provider if you
don’t know what you should fill in these fields.
Now please go to PPTP settings section:
Page 70 / 190
Here are descriptions of every setup item:
Item Name
Description
User ID
Please input user ID (user name) assigned by
your Internet service provider here.
Password
Please input the password assigned by your
Internet service provider here.
PPTP Gateway
Please input the IP address of PPTP gateway
assigned by your Internet service provider
here.
Connection ID
Please input the connection ID here, this is
optional and you can leave it blank.
MTU
Please input the MTU value of your network
connection here. If you don’t know, you can
use default value.
BEZEQ-ISRAEL
Check ‘Enable’ box if you’re using BEZEQ
network service in Israel. Do not check this
box if you’re using other Internet service
provider.
19216811.live