‘Continuous’ - keep internet connection alive,

do not disconnect.

’Connect on Demand’ - only connects to

Internet when there’s a connect attempt,

Manual - only connects to Internet when

‘Connect’ button on this page is pressed, and

disconnects when ‘Disconnect button is

pressed.

Idle Time Out

Please specify the time to shutdown internet

connect after no internet activity is detected in

minute(s). This option is only available when

connection type is ‘Connect on Demand’.

If you wish to select another connection type as broadband connection type, click ‘Back’; or

you can click ‘OK’ to finish with quick setup. You’ll see the following message:

Please click ‘Apply’ to save changes you made and restart the broadband router, this

requires about 30 seconds and the broadband router will stop responding (this is normal

and is not malfunction). You can reconnect to this broadband router and continue on other

settings later.

2

‐

4

‐

4 Using ‘PPTP’ as broadband connection type

If your ISP requires you to use PPTP (Point

‐

to

‐

Point Tunneling Protocol) to establish

connection, you can select this connection type to establish Internet connection.

PPTP connection type requires two kinds of setting: WAN interface setting (setup IP address)

and PPTP setting (PPTP user name and password). Here we start from WAN interface

setting first:

Select the type of how you obtain IP address from your service provider here. You can

choose ‘Obtain an IP address automatically’ (equal to DHCP, please refer to ‘Dynamic IP’

section above), or ‘Use the following IP address’ (i.e. static IP address).

WAN interface settings must be correctly set, or the Internet connection will fail even those

settings of PPTP settings are correct. Please contact your Internet service provider if you

don’t know what you should fill in these fields.

Now please go to PPTP settings section:

Here are descriptions of every setup item:

Item Name

Description

User ID

Please input user ID (user name) assigned by

your Internet service provider here.

Password

Please input the password assigned by your

Internet service provider here.

PPTP Gateway

Please input the IP address of PPTP gateway

assigned by your Internet service provider

here.

Connection ID

Please input the connection ID here, this is

optional and you can leave it blank.

MTU

Please input the MTU value of your network

connection here. If you don’t know, you can

use default value.

BEZEQ-ISRAEL

Check ‘Enable’ box if you’re using BEZEQ

network service in Israel. Do not check this

box if you’re using other Internet service

provider.

Connection Type

Please select the connection type of Internet

connection you wish to use. There are 3

options:

‘Continuous’ - keep internet connection alive,

do not disconnect.

’Connect on Demand’ - only connects to

Internet when there’s a connect attempt,

Manual - only connects to Internet when

‘Connect’ button on this page is pressed, and

disconnects when ‘Disconnect button is

pressed.

Idle Time Out

Please specify the time to shutdown internet

connect after no internet activity is detected in

minute(s). This option is only available when

connection type is ‘Connect on Demand’.

If you wish to select another connection type as broadband connection type, click ‘Back’; or

you can click ‘OK’ to finish with quick setup. You’ll see the following message:

Please click ‘Apply’ to save changes you made and restart the broadband router, this

requires about 30 seconds and the broadband router will stop responding (this is normal

and is not malfunction). You can reconnect to this broadband router and continue on other

settings later.