Please click ‘start’

‐

> ‘run’ at the bottom

‐

lower corner of your desktop:

Input ‘cmd’, then click ‘OK’

Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address followed by ‘Default

Gateway’ (In this example, the IP address of router is 192.168.2.1,

please note that this

value may be different.

)

If you tried the instructions listed above and still cannot find the IP address of this

broadband router / you forget the password, please jump to chapter xx

‐

xx to reset the

broadband router.

NOTE: If the IP address of Gateway is not displayed, or the address followed by ‘IP

Address’ begins with ‘169’, please recheck network connection between your

computer and router, and / or go to the beginning of this chapter, to recheck every

step of network setup procedure

2

‐

4 Using ‘Quick Setup’

This broadband router provides a ‘Quick Setup’ menu, and you can setup basic parameters

of this broadband router.

Please follow the following instructions to use ‘Quick Setup’ menu:

1.

Click ‘Quick Setup’ after logged in.

2.

In the first step of quick setup, you can setup automatic time synchronization settings.

The descriptions of every setting items are listed as follow:

Item Name

Description

Time Zone

Please select a time zone of the country or

region of your residence here. If you can’t find

the country / region of your residence here,

please select a city / region which time zone is

the same with the country / region of your

residence.

Time Server Address

This load-balance router supports NTP

(Network Time Protocol). NTP server will

provide correct time for this router to setup the

date and time of the router automatically.

Please input the host name or IP address of

NTP server here. If you don’t know the host

name or IP address of time server, please ask

network administrator or use ‘pool.ntp.org’ as

time server.

Daylight Savings

If the country / region of your residence use

daylight saving time, please check ‘Enable

Function’ box, and select the beginning and

ending date of daylight time saving.

After you finish with time zone settings, please click ‘Next’ to proceed to next step of quick

setup

‐

broadband type:

Please choose the broadband (Internet connection) type you’re using in this page. There are

six types of Internet connection, they are:

Dynamic IP

‐

Please go to section 2

‐

4

‐

1

Static IP

‐

Please go to section 2

‐

4

‐

2

PPPoE

‐

Please go to section 2

‐

4

‐

3

PPTP

‐

Please go to section 2

‐

4

‐

4

L2TP

‐

Please go to section 2

‐

4

‐

5

If you’re not sure, please contact your Internet service provider. A wrong Internet

connection type will cause connection problem, and you will not be able to connect to

internet.

If you want to go back to previous step, please press ‘Back’ button on the bottom of this

page.

NOTE:

To setup WISP (Wireless ISP) connection please use General Setup -> WAN