Page 41 / 93
Scroll up to view Page 36 - 40
40
2-5-1 System
You can configure system related settings in ‘System’ menu.
Select the setup item you wish to set, then click ‘Next’ to continue.
2-5-1-1 Time Zone
You can setup router’s internal clock here, and you can also let router’s clock
to synchronize with time server automatically.
Page 42 / 93
41
The descriptions of every setup item are listed below:
Item Name
Description
Current Time
Input current date and time manually. Please note
that this router uses 24-hour time format. (Please
input ‘23’ instead of ‘11PM’.
Time Zone Select
Please select the time zone of your residence from
this dropdown menu.
Enable NTP client
update
Check this box and this router will synchronize its
internal clock with time server automatically.
NTP Server
Select the IP address of time server from
dropdown list, or input the IP address by yourself
here. Every IP address in dropdown list comes
with the location of time server; please select the
time server which is nearest to you. If you found
the time is not correct when you select certain time
server, please select another one.
Next
Click this button to save changes you made in this
page.
Cancel
Discard all changes you made in this page.
Refresh
Reload this page, and the current date and time
setting of this router will be displayed on this page.
Page 43 / 93
42
2-5-1-2 Password Settings
You can change the user name and password used to protect the web
configuration interface against unauthorized access. You can also disable the
protection so everyone who knows the IP address of this router can change its
setting. However, it’s not recommended to disable protection.
The descriptions of every setup item are listed below:
Item Name
Description
User Name
Input the user name used to enter web
configuration interface.
New Password
Input the password used to enter web
configuration interface with user name.
Confirm password
Input the password again, to make sure the
password you entered is correct.
Next
Save settings you made in this page. If you
changed user name and / or password, you’ll be
prompted to input them again.
Cancel
Discard all settings you made in this page.
If you want to disable password protection, just leave all fields blank, and click
‘Next’. You’ll be prompted to confirm this:
Page 44 / 93
43
Click ‘OK’ to disable protection, or click ‘Cancel’ and this router will still ask for
user name and password before one can enter web configuration interface.
Page 45 / 93
44
2-5-2 WAN
In WAN menu, you can configure WAN (Wide Area Network, or ‘Internet’)
settings. The settings here are similar to those in Quick Setup menu, but you
can do more detailed configuration here.
To setup WAN settings, please select the type of WAN connection from ‘WAN
Access Type’ dropdown menu first, and then refer to corresponding chapter
below.
2-5-2-1 WAN Access Type: Static IP
NOTE: Please use the IP address assigned by your Internet Service Provider.
19216811.live