Page 36 / 93 Scroll up to view Page 31 - 35
35
Enable Mac Clone
(When in Client mode) If the access point you wish
to connect only permits the connection from
certain MAC address, check this box and the
wireless interface will use the same MAC address
which wired LAN client uses.
When you finish, click ‘Next’ to continue.
7. Select the encryption mode of wireless connection:
Please select wireless encryption type from ‘Encryption’ dropdown menu. If
you select ‘None’ as encryption type, no encryption will be used and other
people will be able to read all information you transmitted by wireless network,
therefore no encryption is not recommended.
Please note that when you use encryption, all wireless clients should use the
same encryption mode and setting.
Page 37 / 93
36
If you select ‘WEP’ as encryption type:
Item Name
Description
Key Length
There are two types of WEP key length: 64-bit and
128-bit. Using ‘128-bit’ is safer than ’64-bit’, but
will reduce some data transfer performance.
Key Format
There are two types of key format: ASCII and Hex.
When you select a key format, the number of
characters of key will be displayed. For example, if
you select ’64-bit’ as key length, and ‘Hex’ as key
format, you’ll see the message at the right of ‘Key
Format’ is ‘Hex (10 characters), which means the
length of WEP key is 10 characters.
Default Tx Key
You can set up to four sets of WEP key, and you
can decide which key is being used by default
here.
If you don’t know which one you should
use, select ‘Key 1’.
Encryption Key 1 to 4
Input WEP key characters here, the number of
characters must be the same as the number
displayed at ‘Key Format’ field. You can use any
alphanumerical characters (0-9, a-z, and A-Z) if
you select ‘ASCII’ key format, and if you select
‘Hex’ as key format, you can use characters 0-9,
a-f, and A-F. You must enter at least one
encryption key here, and if you entered multiple
WEP keys, they should not be same with each
other.
Page 38 / 93
37
If you select ‘WPA (TKIP)’ as encryption type:
Item Name
Description
Pre-shared Key Format
Select the type of pre-shared key, you
can select Passphrase (8 or more
alphanumerical characters, up to 63), or Hex
(64 characters of 0-9, and a-f).
Pre-shared Key
Please input the WPA passphrase here.
It’s not recommended to use a word that can
be found in a dictionary due to security
reason.
If you select ‘WPA2 (AES)’ as encryption type:
Item Name
Description
Pre-shared Key Format
Select the type of pre-shared key, you
can select Passphrase (8 or more
alphanumerical characters, up to 63), or Hex
(64 characters of 0-9, and a-f).
Pre-shared Key
Please input the WPA passphrase here.
It’s not recommended to use a word that can
be found in a dictionary due to security
reason.
Page 39 / 93
38
If you select ‘WPA2 Mixed’ as encryption type:
Item Name
Description
Pre-shared Key Format
Select the type of pre-shared key, you
can select Passphrase (8 or more
alphanumerical characters, up to 63), or Hex
(64 characters of 0-9, and a-f).
Pre-shared Key
Please input the WPA passphrase here.
It’s not recommended to use a word that can
be found in a dictionary due to security
reason.
When you finish, click ‘OK’ to end Quick Setup procedure. It takes few seconds
for this router to save settings, when you see this message, the router is ready
with new setting:
Click ‘OK’ to start to use this router.
Page 40 / 93
39
2-5 Using ‘General Setup’
The ‘General Setup’ menu provides detailed setup procedures of all functions
and settings of this router. If you want to maximize the functionality of this
router, you can use this setup menu to configure detailed settings of this router.
To enter ‘General Setup’ menu, click ‘General Setup’ icon in main menu, and
select the setup item you wish to set.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top